SM2Y5K000/20K00BA

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SM2Y5K000/20K00BA is an array of resistors, typically used to control electrical analog circuits and electrical networks in various kinds of applications. A resistor network is a set of electrical elements, usually resistors, arranged in a particular topology or pattern. Resistor networks are used in a wide variety of applications, including voltage and current divider networks, filter networks, signal leveling, amplifying, voltage matching, and current limiting.

The SM2Y5K000/20K00BA is a surface mount device (SMD) with a through-hole mounting pattern and is one of the larger, higher-power resistor arrays available in the market. It is a 5K-Ohm resistor array with 20 individual resistors, each with a value of 0.05Ω. Because the resistors are integrated into a single component, the device reduces the footprint on the board and the number of components to be soldered. Also, as there is less wiring and wiring reliability is improved.

The SM2Y5K000/20K00BA can be used in a wide variety of applications, including voltage divider networks, filter networks, signal conditioning and amplifying, voltage matching, and current limiting and limiting. In voltage divider networks, the SM2Y5K000/20K00BA acts as a precision current source, providing a reliable voltage reference for voltages lower than the supply voltage. The resistor array also provides a relatively large alternating current rating.

In filter networks, the SM2Y5K000/20K00BA is used to provide a uniform frequency response. The resistor array acts as a band pass filter, allowing frequencies within a specific range to pass while blocking frequencies outside that range. The resistor array can also be used as an amplifier, with each resistor providing a different frequency response.

In signal conditioning and amplifying applications, the SM2Y5K000/20K00BA is used to convert the voltage signal from the input to an output signal that is of suitable. It also acts as an amplifier, allowing signals of varying frequency ranges to be amplified to an acceptable level. In voltage matching applications, the SM2Y5K000/20K00BA can be used to adjust the voltage between two points. Finally, in current limiting applications, the SM2Y5K000/20K00BA acts as an impedance element, limiting the amount of current that can flow between two points.

The working principle of the SM2Y5K000/20K00BA is fairly simple. It consists of a series of resistors, each with their own breakdown voltage and resistance value. When a voltage is applied to the resistor array, current flows from the input to the output. The resistors then serve as voltage dividers, allowing a portion of the voltage to pass through each resistor until the output voltage is achieved. As the resistors have a finite resistance and breakdown voltage, they must be correctly chosen and arranged in order to achieve the desired results.

To sum up, the SM2Y5K000/20K00BA is a resistor array, typically used to control electrical analog circuits and electrical networks in various kinds of applications. It is a surface mount device (SMD) with a through-hole mounting pattern and is one of the larger, higher-power resistor arrays available in the market. It can be used for a variety of purposes, including voltage divider networks, filter networks, signal conditioning and amplifying, voltage matching, and current limiting. Its working principle is based on the fact that it consists of a series of resistors, each with their own breakdown voltage and resistance value. As the resistors have a finite resistance and breakdown voltage, they must be correctly chosen and arranged in order to achieve the desired results.

The specific data is subject to PDF, and the above content is for reference