| Allicdata Part #: | 374-1429-5-ND |
| Manufacturer Part#: |
SMP-1A38-4PT-Q |
| Price: | $ 2.15 |
| Product Category: | Relays |
| Manufacturer: | Standex-Meder Electronics |
| Short Description: | SSR - PHOTO MOSFET, 1 FORM A 600 |
| More Detail: | Solid State SPST-NO (1 Form A) 4-SOP (0.173", 4.4... |
| DataSheet: |  SMP-1A38-4PT-Q Datasheet/PDF |
| Quantity: | 1000 |
| 1 +: | $ 1.95300 |
| 10 +: | $ 1.82889 |
| 25 +: | $ 1.62540 |
| 50 +: | $ 1.54413 |
| 100 +: | $ 1.46286 |
| 250 +: | $ 1.30032 |
| 500 +: | $ 1.21905 |
| 1000 +: | $ 1.13778 |
| 5000 +: | $ 1.09715 |
| Series: | 38 |
| Packaging: | Tube |
| Part Status: | Active |
| Mounting Type: | Surface Mount |
| Circuit: | SPST-NO (1 Form A) |
| Output Type: | AC, DC |
| Voltage - Input: | 1.17VDC |
| Voltage - Load: | 0V ~ 600V |
| Load Current: | 70mA |
| On-State Resistance (Max): | 60 Ohms |
| Termination Style: | Gull Wing |
| Package / Case: | 4-SOP (0.173", 4.40mm) |
| Supplier Device Package: | 4-SOP |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Solid State Relays, or SSRs, are devices that are used to control electrical loads using a low power type of signal. The SMP-1A38-4PT-Q is one such device. It is a 4 pole, single phase, bidirectional solid state relay.
The SMP-1A38-4PT-Q is typically used in applications that require the control of high power loads from a low power signal. These applications include air conditioning systems, heating and ventilation systems, robotics, as well as other automated control systems. Its compact size and light weight make it especially suitable for applications where space and weight are of concern.
The SMP-1A38-4PT-Q can control up to 15A of power at a voltage range of up to 380V. It operates using an input current of 6.5A and an input voltage of 220V. Its switching frequency range is from 0 to 400Hz, with a maximum switching time of 7ms. It is also able to withstand a maximum current of 60A for up to 10ms.
The working principle of the SMP-1A38-4PT-Q is based on a thyristor, which is essentially an electronic switch. The thyristor is connected to the load circuit through a control circuit. When the input signal is applied to the control circuit, the thyristor is triggered and turns on. When the input signal is removed, the thyristor turns off and the load circuit is deactivated. This type of relay is ideal for applications where quick response times are needed.
The SMP-1A38-4PT-Q is a reliable, flexible, and efficient device for controlling high power loads. Its small size, low input current, and high current switching capability make it especially suitable for a variety of industrial and commercial applications. It is a reliable and cost-efficient solution for controlling high power loads with a low power signal.
The specific data is subject to PDF, and the above content is for reference
SSR ZERO SW 480V 16ASolid State
RELAY SSR SPST-NO 20V 4USOPSolid State R...
RELAY DUAL 25A 240V ZC 4-15VDCSolid Stat...
CTRLR TEMP SSR 480V 90A AC OUTSolid Stat...
CTRLR TEMP SSR 240V 90A AC OUTSolid Stat...
RELAY SSR 18A 240VAC AC OUT QCSolid Stat...