Allicdata Part #: | 374-1428-5-ND |
Manufacturer Part#: |
SMP-2A37-8DT |
Price: | $ 2.73 |
Product Category: | Relays |
Manufacturer: | Standex-Meder Electronics |
Short Description: | SSR - PHOTO MOSFET, 2 FORM A 60V |
More Detail: | Solid State DPST-NO (2 Form A) 8-DIP (0.300", 7.6... |
DataSheet: | SMP-2A37-8DT Datasheet/PDF |
Quantity: | 1000 |
1 +: | $ 2.48220 |
10 +: | $ 2.32470 |
25 +: | $ 2.06640 |
50 +: | $ 1.96308 |
100 +: | $ 1.85976 |
250 +: | $ 1.65312 |
500 +: | $ 1.54980 |
1000 +: | $ 1.44648 |
Series: | 37 |
Packaging: | Tube |
Part Status: | Active |
Mounting Type: | Through Hole |
Circuit: | DPST-NO (2 Form A) |
Output Type: | AC, DC |
Voltage - Input: | 1.17VDC |
Voltage - Load: | 0V ~ 60V |
Load Current: | 500mA |
On-State Resistance (Max): | 1.6 Ohms |
Termination Style: | PC Pin |
Package / Case: | 8-DIP (0.300", 7.62mm) |
Supplier Device Package: | 8-DIP |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Solid State Relays are a form of electronic control device featuring low-voltage off-state control and high voltage AC or DC on-state control. The SMP-2A37-8DT is a specific type of solid state relay with a wide range of applications. This article will explain the application field and working principle of the SMP-2A37-8DT.
The SMP-2A37-8DT solid state relay is used in a variety of applications, including process control, light intensity control, temperature control, slow-starting motors, power supplies, and other loop control applications. It is specifically designed for handling high-power resistive loads, and is suitable for use in AC (alternating current) or DC (direct current) applications. The SMP-2A37-8DT is also capable of controlling AC power source to AC loads, or DC power source to DC loads, and can be used for switching a variety of voltage levels. The range of voltage can range from 5 to 347 Volts, and can handle up to 25 Amps of current.
The SMP-2A37-8DT’s working principle is based on a thyristor, which is a semiconductor device. The thyristor acts as a switch to allow or prevent current that is passing through the relay. When the input control signal is at a low voltage, the thyristor is in a “nonconducting” state, and current will not pass through the relay. When the voltage of the input signal increases, the semiconductor switches to the “conducting” state, allowing the current to flow through the relay. The SMP-2A37-8DT can control AC power sources, DC power sources, or both, and can be used for switching a variety of voltage levels.
The SMP-2A37-8DT features a coil-operated or electronic switch with a wide range of features for improved protection. The relay features integrated over-temperature protection, which protects the relay from being damaged when it gets too hot, and integrates short-circuit protection, which prevents the current through the relay from getting too high. The relay also features fast response time, low power consumption, and high accuracy load switching.
The SMP-2A37-8DT is a high-power, reliable, and affordable solid state relay ideal for applications that require precision control. It is designed to handle high-power resistive loads, and is suitable for AC (alternating current) or DC (direct current) applications. The SMP-2A37-8DT offers a range of features and benefits that make it an excellent choice for process control, light intensity control, temperature control, slow-starting motors, power supplies, and other loop control applications.
The specific data is subject to PDF, and the above content is for reference
SSR ZERO SW 480V 16ASolid State
RELAY SSR SPST-NO 20V 4USOPSolid State R...
RELAY DUAL 25A 240V ZC 4-15VDCSolid Stat...
CTRLR TEMP SSR 480V 90A AC OUTSolid Stat...
CTRLR TEMP SSR 240V 90A AC OUTSolid Stat...
RELAY SSR 18A 240VAC AC OUT QCSolid Stat...