SMP0720SCMC

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors are semiconductor devices with four active layers. They are commonly used for digital control and load switching in various applications. In general, they switch to either the ON or OFF state when triggered by an input signal. The SMP0720SCMC is a special type of thyristor tailored to meet specific conditions, such as load current demand and power, in both automotive and industrial applications.

The SMP0720SCMC is a center-gate, phase-controlled, minority carrier thyristor. It is equipped with two independent control gates to allow switching of the power flow from one side to the other. The two sides can be either AC or DC power sources. This feature gives the thyristor the ability to provide protection to sensitive devices by switching the power flow between them.

The working principle behind the SMP0720SCMC thyristor is based on the PN junction formed by the four active layers within the device. As the thyristor is triggered, the PN junction is forward biased and a current begins to flow. The flow of current then increases exponentially which produces an avalanche effect until the filed force drops sufficiently allowing the blocking of the junction.

In order to control the on/off state of the thyristor, an external signal must be applied to the gate. The thyristor will not turn on until a sufficient amount of current is supplied to the gate. When it is turned off, the current supplied to the gate is reversed, effectively blocking the current flow.

The SMP0720SCMC has a wide array of applications, such as in solid-state relays, motor speed control, power factor correction, overcurrent protection, phase control, and polarity change. It is widely used in automotive and industrial settings due to its high current capability, fast switching speed, and low forward voltage drop.

Overall, the SMP0720SCMC is a special type of thyristor designed for specific applications, such as automotive and industrial settings. It is equipped with two control gates for switching the power flow between two sources, either AC or DC. Its working principle is based on the PN junction formed by the four active layers within the thyristor, and it is able to be controlled by an external signal. Finally, it is capable of providing protection to sensitive devices and is suitable for a wide array of applications.

The specific data is subject to PDF, and the above content is for reference