Power (Watts):	240W
Approvals:	TUV, UL
Minimum Load Required:	No
Size / Dimension:	4.59" L x 2.52" W x 4.90" H (116.6mm x 64.0mm x 124.5mm)
Mounting Type:	DIN Rail
Features:	Adjustable Output, IP20, PFC, Universal Input
Operating Temperature:	-40°C ~ 71°C (With Derating)
Efficiency:	93%
Voltage - Isolation:	3kV
Applications:	Hazardous Locations, ITE (Commercial)
Series:	SMP11
Current - Output (Max):	10A
Voltage - Output 4:	--
Voltage - Output 3:	--
Voltage - Output 2:	--
Voltage - Output 1:	24V
Voltage - Input:	88 ~ 264 VAC
Number of Outputs:	1
Type:	Enclosed
Part Status:	Active

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to SMP11-L20-DC24V-10A

The SMP11-L20-DC24V-10A is a type of AC DC Converters, and it is used in a wide variety of applications. It is designed to convert AC current into DC current, while also providing isolation to protect the load from external noise and current fluctuations. The SMP11-L20-DC24V-10A is a single phase converter, offering up to 10A of output power.

Application Field

The SMP11-L20-DC24V-10A is suitable for use in a variety of applications, such as electronic control systems, industrial automation, and telecommunications. It is also suitable for use in medical equipment, including X-ray machines, Electroencephalograph (EEG) machines, and Magnetic Resonance Imaging (MRI) machines. In addition, this converter is suitable for use in other medical applications, such as Ultrasound, Nuclear Medicine, and Angiography.The SMP11-L20-DC24V-10A is also used in consumer electronics, such as personal computers, televisions and DVD players. This type of converter is also used in the aviation industry, for powering aircraft instruments and devices.

Working Principle

The SMP11-L20-DC24V-10A is a type of AC DC converter, and its operation is based on the principle of rectification. This means that the alternating current is converted to a direct current by half-wave rectification or full-wave rectification. In half-wave rectification, the positive half of the AC waveform is converted to DC, while full-wave rectification uses both the positive and negative half of the AC waveform.The SMP11-L20-DC24V-10A is a single phase converter, and it uses a single winding to provide isolation from external noise and current fluctuations. Inside the converter, the AC current is converted into DC current by a rectifier bridge, which consists of four diodes that are connected in a bridge arrangement. The diodes allow current to flow in one direction only, which results in a direct current output.The output voltage of the SMP11-L20-DC24V-10A is regulated using a voltage regulator, which consists of a transistor and resistor network. The voltage regulator ensures that the output voltage of the converter remains constant, even when the input voltage fluctuates.

Conclusion

The SMP11-L20-DC24V-10A is a type of AC DC converters, and it is used in a wide variety of applications. It is designed to convert AC current into DC current, while also providing isolation to protect the load from external noise and current fluctuations. Inside the converter, the AC current is converted into DC current by a rectifier bridge, and the output voltage is regulated using a voltage regulator. The SMP11-L20-DC24V-10A is suitable for use in a variety of applications, including electronic control systems, industrial automation, telecommunications, and medical equipment.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description