SN080104RSER

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Analog switches are devices used for routing electrical signals in applications that require low losses, low distortion, and low crosstalk. Among them, the special purpose SN080104RSER analog switches offer a wide range of features, including higher transfer rate, a larger number of channels, and some features that make it suitable for very specific and demanding operations. The SN080104RSER provides an interface between two control lines, where the two control lines can be either a single-ended analog signal or a differential analog signal, and as a result, the device can be used in various applications that require the combination of analog and digital signals.In the simplest of operations, the SN080104RSER connects two electronic circuits together in order to transfer signals between them. The two circuits can be two separate analog circuits or one analog and one digital circuit. The signals that are routed can have a frequency of up to 400 kHz and an output can be selected by adjusting turn-on resistance between 0 and 50 Ω. The device is also designed to provide an effective transfer of analog signals from one circuit to the other without causing distortion.The SN080104RSER has a wide range of applications. It is particularly well suited for use in the medical industry. It can be used in the monitoring of vital signs, such as ECG and EEG, and for the connection of medical devices, such as infusion pumps, defibrillators, and oxygen sensors. The device is also suitable for use in the audio and video industries. It can be used for routing and mixing audio and video signals, as well as for recording, editing and playback operations.The working principle of the SN080104RSER is fairly simple. It consists of a series of transistors and diodes that form a switch, which is then connected to two control lines. The device can work in three positions. In the first position, the switch is off and no signal is passed through. In the second position, the switch is fully open and signals can be passed through both the source and the drain sides. Finally, in the third position, the switch is closed and signals can be passed only through one side.By adjusting the turn-on resistance, it is possible to select which circuit the signal will go through. For example, if the resistance is set to 0, the signal will be routed only through the source side. If the resistance is set to 50 Ω, the signal will be routed only through the drain side. This makes the device very versatile and useful in applications that require routing or mixing different signal types.The SN080104RSER is a reliable and cost effective device that provides good performance under demanding conditions. It is suitable for use in both commercial and industrial applications. As well as the potential for high signal switching rates, the device also provides reliable and consistent performance that is suitable for high-end audio and video applications.

The specific data is subject to PDF, and the above content is for reference