SN65C3232PWG4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

SN65C3232PWG4 is a serial parallel converter that enables the interfacing of two devices with different electrical and logical characteristics. It is designed to operate as an integrated circuit and is often used in communication systems and computer networks. The device operates by combining two communication standards, serial and parallel. It converts serial data into parallel data, and can also operate in the opposite direction, converting parallel data into serial data. This type of device is commonly used to bridge between peripheral buses, allowing for connectivity between devices that operate on different standards. The device can operate as either an asynchronous or synchronous serial-parallel converter.

The SN65C3232PWG4 device is commonly found in the automotive sector due to its high level of reliability and robustness. It is also used in communication systems and local area networks (LANs). In automotive applications, the device is typically used to bridge between a controller area network (CAN) and a J1939 bus. CAN is a two-wire serial data bus that is used to transmit messages between different systems on a vehicle, while J1939 is a more sophisticated data-logging protocol that is used on heavy-duty vehicles such as trucks and buses.

The SN65C3232PWG4 serial-parallel converter is composed of three sections: the control section, the bus section, and the transceiver section. The control section is responsible for the overall operation of the device. It provides control signals such as clock, reset and enable signals. The bus section consists of four drivers and four receivers, which are used for data transmission in both directions. The transceiver section is responsible for the physical transmission of data. It consists of a transmitter and a receiver, which communicate with each other through differential signaling. This type of signaling is more robust and reliable compared to single-ended signaling, as it allows for robust communications even in the presence of noise.

The SN65C3232PWG4 device is capable of operating at data rates up to 1 Mbps for asynchronous transmissions and up to 12 Mbps for synchronous transmissions. It uses the RS-485 physical layer standard, which allows for up to 32 nodes to be connected to a network without the need for repeaters. This makes the device ideal for multi-drop applications in which multiple devices are connected to a single bus.

In summary, SN65C3232PWG4 is a serial-parallel converter designed to enable the interfacing of two data buses with different electrical and logical characteristics. It is commonly used in communication systems and LANs, as well as automotive applications, due to its high level of reliability and robustness. The device is composed of three main sections: control, bus and transceiver. It supports data rates up to 12 Mbps and is capable of operating with up to 32 nodes without the need for repeaters. This makes it an ideal choice for multi-drop applications.

The specific data is subject to PDF, and the above content is for reference