SN65HVD10QDG4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SN65HVD10QDG4 is a driver, receiver and transceiver integrated circuit (IC) produced by Texas Instruments. It is an interface device that allows signals to be transmitted and received between different nodes. The IC can be used for a variety of industrial applications, such as automotive, telecom, industrial automation, robotics and motion control.

Features

The SN65HVD10QDG4 IC features an integrated circuit with a transmit/receive switch and an internal voltage regulator. The IC is designed to tolerate up to a maximum of 12 control signals and provides short-circuit protection for the signals being transmitted. The IC operates with logic levels of 2.7V to 5.5V, making it suitable for 5V and 3.3V applications. The IC can support up to two 3-state enable/disable inputs and has a low quiescent current when not in use. It also includes a receiver output active low enable (REn) signal, a dead bus time-out (DBT) signal, and a receive error indication (RDY) signal. The IC is also tolerant to electrostatic discharge (ESD) events up to 8 kV.

Applications

The SN65HVD10QDG4 is used in a variety of industrial applications. It can be used in automotive applications such as in-vehicle networks, powertrain control and bus networks. It is also used in industrial automation, robotics and motion control applications. In addition, the IC is suitable for telecom applications such as media access control (MAC) and local area network (LAN) applications.

Working Principle

The SN65HVD10QDG4 works on the principle of differential signals. Differential signals involve two signal lines; one carrying the data and the other carrying the complementary data. This allows for increased immunity to noise and greater transmission speeds. The IC can also be used with single ended signals, which only involve one signal line. In this case, the complementary data is derived from the single ended signal.

The IC includes a transmit/receive switch and an internal voltage regulator to control the signals being transmitted. The IC is designed to accept up to 12 control signals and is able to tolerate short-circuit protection in the event of signal failure. The IC can also support up to two 3-state enable/disable inputs and has a low quiescent current when not in use. Additionally, the IC includes receiver output active low enable (REn) signal, dead bus time-out (DBT) signal, and receive error indication (RDY) signal.

The SN65HVD10QDG4 is an IC suitable for use with 5V and 3.3V logic levels and can support up to an 8 kV electrostatic discharge (ESD) event. The IC is designed for use in a number of industrial applications, such as automotive, telecom, industrial automation, robotics and motion control.

The specific data is subject to PDF, and the above content is for reference