SN74ABT16500BDLG4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SN74ABT16500BDLG4 is a universal bus transceiver chip from Texas Instruments. It is mainly used for level shifting and provides general-purpose configuration for low-voltage/high-voltage applications. It also serves as a buffer for receiving and transmitting signals in an intermediate level between two systems.

SN74ABT16500BDLG4 is equipped with active bus-hold circuits. It helps reduce power usage, as it can sense the state of the bus and set the output to high (VCC) or low (ground) instead of keeping the bus in a high impedance state. This reduces the power dissipated when the bus is not in use.

The SN74ABT16500BDLG4 is a piece of CMOS technology and has 16 pins, which can work with any power supply between 1.65V and 3.6V. The device can operate at temperatures between -40°C and 85°C, according to Military temperature grades.

Regarding its functions, the SN74ABT16500BDLG4 supports CMOS standards for low voltage differential signaling. LVDS presents a low power solution for 10 Gigabit ethernet, Fast Ethernet and Fibre Channel. This chip can also support multiple logic protocols, like EIA/TIA-644, SMPTE-344M and 3G-SDI.

The SN74ABT16500BDLG4 is mainly used for transmitting data between two independent buses of the same speed and can be used for any speed up to 4 Gbps. It is also used for buffer and converter applications, such as level shifters, repeaters, backplanes and cross-bar switches.

In terms of its working principle, the SN74ABT16500BDLG4 consists of two independent, 3-state buses, each having 8 outputs. Two sets of twoEnable (En1, En2) inputs are employed to control each bus. A HIGH logic level enables the bus when En1 is LOW and En2 is HIGH. If both En1 and En2 are LOW, the outputs on the bus are in a high-impedance state.

Additionally, the chip is able to perform data retiming by taking the incoming signal of the transmitter and retiming it in the receiver. This is done by adjusting the skew of the signal and delaying it to match the input timing. The device incorporates a passive balance network, which helps filter noise and maintain signal integrity.

In conclusion, the SN74ABT16500BDLG4 device is a versatile bus transceiver, which can be employed in many applications. It enables one to interface with any power supply, provides general-purpose configuration and features active bus-hold circuits. Moreover, its ability to transfer data with any speed up to 4 Gbps makes it the ideal tool for certain applications. Finally, its internal data retiming and passive balance network contribute to reduce noise and maintain signal integrity.

The specific data is subject to PDF, and the above content is for reference