SN74ABT273DW

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SN74ABT273DW is a dual-D-type flip flop used in digital logic devices. This type of flip-flop is widely used in various integrated circuits (ICs) and computer applications. It has the capacity to store one bit of data and can be used to toggle the state of the output signal depending on the input condition. It performs two different functions, namely, triggering and sampling. This article will define the application field and the working principle of the SN74ABT273DW.

Application Field

The SN74ABT273DW is commonly used in digital logic applications, mainly in the field of microprocessors, memory chips, FPGAs, and ASICs. Specifically, it can be used in synchronous circuits and applications that require a multi-bit storage capacity or shift register capability. It can also be used in multiplexers, demultiplexers, encoders, and decoders. Furthermore, the SN74ABT273DW can be used to replace older or out-dated flip-flop circuits and be incorporated into newer designs.

Working Principle

According to the datasheet, the SN74ABT273DW is a dual D-type flip-flop that is based on two master-slave flip-flops. It has two separate data inputs and two outputs. The two data inputs are the D0 and D1 inputs, which are used to store the incoming data. The two outputs, Q0 and Q1, produce the output signals based on the condition of the data inputs. Basically, the flip-flop stores the data and produces either a high (1) or low (0) output. When the clock signal is applied, the data is shifted to the next state and the output signal is produced accordingly.

A truth table is used to determine the output signal based on the input condition. The truth table for the SN74ABT273DW is shown below:

|Data Inputs|Q0|Q1||D0|D1|High|Low||High|High|High|Low||High|Low |Low |High||Low |High|Low |High||Low |Low |High|Low|

As shown in the truth table, the SN74ABT273DW will produce a high output signal when both the D0 and D1 inputs are high, and low output when D0 is high and D1 is low, or D1 is high and D0 is low. The output signal will remain in the same state when the D0 and D1 inputs are both low. Thus, the output signal will toggle between two states, depending on the condition at the input terminals.

The output signals of the SN74ABT273DW can also be used as a contrast signal for edge detection. When the inputs are set to both high or both low, the output signal will not be affected. If either the D0 or D1 inputs are toggled, the output of the flip-flop will be inverted and a good reference signal for edge detection can be obtained.

Conclusion

The SN74ABT273DW is a dual-D type flip-flop that can be used in a variety of digital applications. Its application field includes memory chips, FPGAs, and ASICs, as well as synchronous circuits. Additionally, it can be used to replace older flip flop circuits and incorporated in newer designs. It has two data inputs and two outputs. Depending on the input condition, the output signal will remain in the same state or toggle between two states. Furthermore, the output signal can be used for edge detection. This concludes the description of the application field and working principle of the SN74ABT273DW flip-flop.

The specific data is subject to PDF, and the above content is for reference