SN74ABT543ADBR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SN74ABT543A is a quad D-type flip-flop with integrated direction control from Texas Instruments. It is part of a series of devices that includes the SN74ABT542A and the SN74ABT444A. These components are used as logic buffers for converting digital signals between logic families or as flip-flops for re-timing signals. Direction control is achieved using the direction pin, which changes the level kept at the output relative to the input. In this way, the user can control whether to inputs come straight out at the outputs or the data has been inverted.

The SN74ABT543A is designed to be operated in the range of 4.5 to 5.5 volts. With the direction pin high and the enable pin low, the data is repeated either directly or inverted. With the enable pin high, the outputs remain low regardless of the direction pin and input data. This allows the user to retain, tristate and store data.

Application Field:

The SN74ABT543A component can be used in applications where logic buffers are needed for transferring data between logic families or for synchronizing signals. These components are also used in applications such as interrupt controllers, digital logic controllers and various other timing systems where flip-flops are needed for re-timing and control.

Working Principle (Logic - Buffers, Drivers, Receivers, Transceivers):

The working principle of the SN74ABT543A is through its directional control pins, which enable the device to repeat data directly or to invert the data when necessary. The enable pin allows the device to go into a tri-state mode, thus allowing it to store/retain/ignore data when required. The device is designed to be operated in supply voltages of 4.5 - 5.5V and uses standard CMOS logic circuits to transfer, store and invert data.

The SN74ABT543A is a part of a series of components that includes, Logic buffers, Drivers, Receivers and Transceivers. All these components provide data transfer and storage, and re-timing of signals. Additionally, these components are integrated together in some systems, resulting in improved system performance.

Logic buffers are used for converting digital logic signals. Buffers come in many types such as tristate, open-drain, level shifters and buffer logic units. As discussed earlier, SN74ABT543A is a logic buffer that is based on CMOS logic circuits. It helps in data replication, transmission and inversion.

A driver is a type of specialized chip used to convert the digital signals (1s and 0s) into a form that can be used by the receiving circuit or used by the driven circuit. A transceiver is an integrated device used to both receive and transmit data. A receiver is designed to detect a signal and amplify it. Transceivers and Receivers are further broken down into Serial and Parallel data types.

In conclusion, SN74ABT543A is part of a series of components from Texas Instruments that includes Logic Buffers, Drivers, Receivers and Transceivers. These components are used for transferring data between logic families, re-timing signals, or storing/retaining/ignoring data when required.

The specific data is subject to PDF, and the above content is for reference