SN74ABT574ADW

Max Propagation Delay @ V, Max CL:	4.8ns @ 5V, 50pF
Base Part Number:	74ABT574
Package / Case:	20-SOIC (0.295", 7.50mm Width)
Mounting Type:	Surface Mount
Operating Temperature:	-40°C ~ 85°C (TA)
Input Capacitance:	3.5pF
Current - Quiescent (Iq):	250µA
Voltage - Supply:	4.5 V ~ 5.5 V
Current - Output High, Low:	32mA, 64mA
Trigger Type:	Positive Edge
Series:	74ABT
Clock Frequency:	200MHz
Number of Bits per Element:	8
Number of Elements:	1
Output Type:	Tri-State, Non-Inverted
Type:	D-Type
Function:	Standard
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

SN74ABT574ADW Logic - Flip Flops - Application Field and Working Principle

The SN74ABT574ADW is a quad flip-flop that is often used in Logic and Flip-Flop applications. It is a D type flip-flop which means the output always follows the input. It has an asynchronous reset, which means that when the reset pin is driven low, the output will reset regardless of the data at the input. This makes it an ideal choice for logic applications that require a reset.The SN74ABT574ADW is a single-gate device with four outputs for each of the four flip-flops. These outputs are also referred to as Q0, Q1, Q2, and Q3. It also has two clock inputs, a clear/reset input, and a data input. The two clock inputs control the timing of the output, while the clear/reset input resets the output to a predetermined logic level. The data input determines what logic level will be presented at the output given the current clock state.The SN74ABT574ADW is used in a wide range of applications. It is often used in process control systems and other embedded systems. It can also be used in digital oscillators, doubly balanced modulators, programmable logic controllers (PLCs), and as part of other logic or flip-flop circuits. The SN74ABT574ADW can be used in a variety of configurations. It can be configured as a single latch, a pair of latches, a quad latch, or a dual 4-bit synchronous counter. It can even be used to build a 4-bit shift register.In order for the SN74ABT574ADW to work properly, it must be supplied with the correct power supply and it must have the correct clock timing. The power supply for the SN74ABT574ADW is typically a single +5 Volts supply. The clock rate required for the SN74ABT574ADW is typically between 0.2 to 4MHz. The SN74ABT574ADW also needs to have the correct timing, which is typically done with a crystal oscillator or some other form of precision oscillator.Working with the SN74ABT574ADW typically involves using a schematic diagram to understand the component connections and applying a series of inputs to the device to see the output state. For example, if the SN74ABT574ADW is being used as a single latch, then it must be driven with two sets of data; one set is a logic zero and the other is a logic one. If the clock is driven with a logic zero, then the output will remain the same as what is being driven on the data inputs. If the logic level of the clock changes from a logic one to a logic zero, then the output will change from the data input level to the opposite level.The SN74ABT574ADW is a versatile device with many applications and can provide great value when used in the correct application. It is important to remember that the correct power, clock rate, and timing must be taken into account for the device to function properly. Additionally, understanding the component connections and applying the correct data inputs to the device will ensure the output matches the desired result.For more information on the SN74ABT574ADW and its uses, the datasheet can be found at: https://www.ti.com/lit/ds/symlink/sn74abt574a.pdf

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description