SN74ACT241NSRG4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Logic circuits such as buffers, drivers, receivers, and transceivers allow signals to transition between one electronic component to another. The SN74ACT241NSRG4 is an advanced version of the traditional logic devices, providing faster and more reliable logic circuit components to the market. This article discusses the application field of the SN74ACT241NSRG4 and its working principle.

Application Field

The SN74ACT241NSRG4 is a high-speed, low-power CMOS quad buffer. It is designed to operate from a single 3.3 volts to 5.5 volts supply and can provide up to 12 mA of current on each output port. The device features low current consumption, a standby mode where it can consume only 10 μA, and a high operating speed, with a maximum propagation delay of six nanoseconds. The SN74ACT241NSRG4 can also handle a wide range of data rates, making it an ideal choice for applications in high-density logic circuits such as in FPGAs and other similar devices.

The SN74ACT241NSRG4 is frequently used in telephone switching systems, data communication applications, and industrial control systems. This device is also well suited for use in medical instrumentation, controlling industrial motors, and driving display devices. The device can be used to achieve higher speeds and reduce power consumption in embedded applications such as automotive systems and computer systems.

Working Principle

The SN74ACT241NSRG4 is a four-channel bidirectional buffering device. It is designed to provide voltage and current buffer functions, allowing signals to transition from one logical device to another. The device contains four buffer output channels, each of which can be individually enabled or disabled depending on the application.

When the SN74ACT241NSRG4 is enabled, it connects the two I/O pins, allowing a two-way transfer of data signals between two logically connected devices. On the input side, a pull-up resistor is placed in series with the input of the device, allowing the lack of external voltage to be detected. When the input voltage is greater than a predetermined level, the device becomes enabled and the output is pulled high. When the input voltage falls below the predetermined level, the device is disabled and the output is pulled low.

The SN74ACT241NSRG4 also contains a slew rate control feature, allowing the user to select from three different slew rate settings. This enables the device to filter out switch-induced noise and prevents outputs from consuming too much power or short-circuiting.

Conclusion

The SN74ACT241NSRG4 is a high-speed, low-power quad buffer designed for operations from 3.3 volts to 5.5 volts. It is well suited for use in a wide range of data communication applications, supporting data rates of up to 12 mA. The device contains four buffer output channels, each of which can be individually enabled or disabled, and features a slew rate control feature to prevent switch-induced noise and power consumption issues. With its low power consumption, high operating speed, and versatile application capabilities, the SN74ACT241NSRG4 is a great choice for high-density logic circuits.

The specific data is subject to PDF, and the above content is for reference