SN74AUP1G80YFPR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Flip-Flops, also known as bi-stable devices, are classified as a type of logic circuit. Flip-flops are composed of a combination of logic gates that store binary information and changes its state when certain logic signals are applied to its input. SN74AUP1G80YFPR is a monostable Flip-Flops which is commonly used in various applications.

SN74AUP1G80YFPR has the 3 input pins (S, R and D) and 2 output pins (Q, Q\'). It has active low set (S) and reset (R) inputs and an active low data (D) input. S and R are mutually independent, so they can be triggered independently. When S is high and R is low, the flip flop is reset and Q is reset to logic level low. When R is high and S is low, the flip flop is set and Q is set to logic level high. If S is low and R is low, the D input is enabled and the level of Q is set to the level of D. There is an enable (E) pin that allows the flip-flop to be placed in a high-impedance state, and the output levels cannot be changed until the enable signal is removed and the input logic levels are established.

One of the main applications of SN74AUP1G80YFPR is in digital circuits. It is used to synchronize different clock signals and output them after a certain delay, which can be used for data storage. The flip-flop can also be used as a latch to store data until it is released when certain conditions are met. In addition, it can also be used to convert a single-input signal into multiple-input signals, or even a serial signal into a parallel signal. It is also commonly used in frequency divide circuits, waveform generators and waveform memory circuits.

In addition to its numerous applications, SN74AUP1G80YFPR also has a simple working principle. When a logic signal is applied at the input pins, its output states correspond to what is applied at the input pins. When S is high and R is low, Q = 0. When R is high and S is low, Q = 1. When both S and R are low, the data at D is applied and the state of Q follows the data at D. Since both S and R inputs are mutually independent, the flip-flop can be both set and reset simultaneously.

To sum up, SN74AUP1G80YFPR is a monostable Flip-Flops which is composed of a combination of logic gates. It has active low set (S) and reset (R) inputs and an active low data (D) input. It is mainly used in digital circuit, frequency divide circuits, waveform generators and waveform memory circuits. Its working principle is quite simple as it changes its output state based on the signals used at its input pins.

The specific data is subject to PDF, and the above content is for reference