SN74ACT245NG4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction: The SN74ACT245NG4 is a high-speed octal buffer/driver with 3-state outputs from Texas Instruments. It is used to drive bus lines of up to five volt levels and for bidirectional bus buffering. It meets or exceeds the requirements of JEDEC standard 18. This logic device features a single active-low output enable for 3-state output capabilities, with the octal buffers operating in common mode logic.

Application Field: SN74ACT245NG4 is mainly used in applications that require high-speed operation and when driving mid- to high-impedance loads. These octal buffers can be used to drive buses to usually used address and data lines. It is also often used in applications that require fast multiplexing with minimal propagation delay. It is most commonly used in computer, communication and automotive industries.

Working Principle: The SN74ACT245NG4 chip follows the Schmitt trigger principle. It operates in two modes, single-ended and differential mode. In both modes, the active-low input buffer accepts TTL-compatible input signals and offers a typical propagation delay of 5.6 ns. The differential-mode operation of the SN74ACT245NG4 ensures good noise margin and these Octal Buffers/Drivers have a high-impedance level for Bus Oriented Applications. The active-low output enable (OE) pin is used to open or close the output. The output is open or pulled low for logic 0 and high for logic 1. The power supply-voltage range of this device is 2.7V to 5.5V.

Conclusion: SN74ACT245NG4 is an octal buffer/driver from Texas Instruments with 3-state outputs. It is used to drive bus lines of up to five volt levels and for bidirectional buffering. It is mainly used in computer, communication and automotive industries. The SN74ACT245NG4 chip follows the Schmitt trigger principle and it has an active-low output enable (OE) pin to open or close the output. The power supply-voltage range is 2.7 volts to 5.5 volts. It is an ideal device for many logic applications.

The specific data is subject to PDF, and the above content is for reference