SN74LS293N

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SN74LS293N is a dual 4-bit binary counter with separate counters and synchronous reset capabilities. In fact, it can count modulo 16, so it is also known as a 4-bit decade counter. The counter is constantly advancing from 0 to 15 and then returns to 0 when it reaches the 16th (binary 1000) count. This counter also has two clock inputs, two reset inputs, and two enable inputs.

The SN74LS293N is generally used in a wide range of applications including electronic clocks, watches, calculator, alarm systems, traffic signals, metering systems, and gaming machines. It is typically used to count events, measure frequency, control inputs, generate outputs, and analyze output sequences.

The SN74LS293N is a logic device with no internal power source or memory, so it needs to be connected to an external power source. The inputs can be digital or analog but all of them need to be in digital form in order to be accepted by the device. The clock and reset inputs allow the trigger of the subsequent count. The enable inputs are used to control the output of the counters.

The SN74LS293N operates on a 5V power supply and has five pins. It has two clock pins, two reset pins, and an enable pin. The signals need to be of TTL digital level such as 0V/1V or 0V/5V. The clock and reset inputs need to be at 0V for starting the counter and for resetting the counters. The reset input has a higher priority than the clock input.

The working principle of the SN74LS293N is quite simple and follows the same logic as other binary counters. The counter is incremented from 0 to 15 and then it returns to 0 on reaching the 16th count. The active edges of the clock and reset input signals can control the trigger of the count-up or reset operation. When both the reset and clock inputs are low, the count operation is initialized. If only the clock is high, then the count is triggered, and if only the reset is high, then the count is reset.

The SN74LS293N is a logic device that can be used to count in many different applications, such as counting the number of events, measuring frequency, controlling inputs, generating outputs, and analyzing output sequences. It is powered by a 5V power supply and is designed to be used with TTL digital levels of 0V/1V or 0V/5V. By programming the clock and reset inputs and using the enable pin, the SN74LS293N can be used to accurately count input signals from low to high transitions.

The specific data is subject to PDF, and the above content is for reference