SN74ACT3641-15PQ

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

SN74ACT3641-15PQ Logic - FIFOs Memory

The SN74ACT3641-15PQ is a device that is classified as a Logic - FIFOs Memory. The SN54ACT3641-15PQ is a First-In First Out (FIFO) buffer that is designed to provide a serial/parallel interface for data transfer between two different platforms or systems.

The SN54ACT3641-15PQ device allows data to be transferred between a single source and multiple destinations. It features 16 data inputs, 4 flag inputs, and 8 flag outputs. With the help of the four flag inputs, data can be sent to multiple destinations and the eight flag outputs allow the device to be used to indicate the start of the transfer and the status of the transmission.

The SN54ACT364PQ Logic - FIFOs Memory has three operating modes: direct load, FIFO mode, and transparent mode. In the direct load mode, the device is used to transfer data directly and simultaneously to multiple destinations with the help of 4 flag inputs. In the FIFO Mode, data is transferred serially from the source in a FIFO manner into the device. In the transparent mode, the device acts as a buffer between the source and destination and the data from the source is sent to the destination without any alteration.

The SN54ACT3641-15PQ device also provides various features for enhanced data transmission. These features include byte strobe enable, byte enable input, byte strobe enable output, byte parity detect, and byte parity enable. With these features, data can be transmitted more effectively and accurately between the two platforms.

The SN54ACT3641-15PQ device has an open-drain output, which supports both open-drain and TTL levels. The device also features an intelligent reset capability which is used to reset the data in the FIFO device and also to reset the signal flags when the process of data transfer is completed. The device also has a low-power shutdown feature which enables the logic sections of the device to be powered down while keeping the FIFO data intact.

The SN54ACT3641-15PQ device has two pins for power supply, one is for ground and the other is for VBBC. Both the VBBC and GND pins must be connected to a supply voltage of 3.3V in order to provide power to operate the device. In addition, the device supports the use of programmable logic for customization of various functionalities.

The SN54ACT3641-15PQ device is a low-voltage, low-power, and highly integrated solution for data transfer between two different platforms. The device is suitable for various applications such as network bridges, legacy system migration, and communication interface. With its high current drive and state of the art features, it is the ideal solution for a wide range of applications.

The specific data is subject to PDF, and the above content is for reference