SN74AHC1G14DCKT Integrated Circuits (ICs)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SN74AHC1G14DCKT is a dual inverting Schmitt-trigger logic gate. It is a single gate that uses N-channel MOS transistors to provide two inverting gate outputs in a single package. It is part of the logic gates and inverters family and is used in various applications.

The device is typically used in digital systems that require clean digital signals, such as microcontrollers, counters, processors, etc. It is also commonly used in communication systems and signal-processing applications, such as voltage detection, data coding/decoding, signal transmission, signal isolation, etc.

The SN74AHC1G14DCKT has two independent gates. The A input (left gate) is internally connected to the output by a low-impedance connection, the B input (right gate) is connected to Vcc. Both the A and B input terminals act as inputs and will be referred to as ‘inputs’ for the remainder of this discussion.

The device draws low power and can be used in low-power and low-voltage applications. At supply voltages of 3.3V the device can handle up to a 400KHz input frequencies. The device has a 5MHz minimum guaranteed speed and can handle up to a 20MHz maximum input frequency. It is available in SOT-23 package.

The SN74AHC1G14DCKT operates by comparing the input signals with a reference voltage, Vref. This reference voltage is between 1/3 of the supply voltage and 2/3 of the supply voltage. If the input is below Vref, the output is a high voltage. If the input is above Vref, the output is a low voltage.

The Schmitt-trigger acts as a buffer between the input and the output, thus providing clean digital signals. When the input signal is applied, the Schmitt-trigger compares it to the internal Vref voltage. When the input signal is lower than Vref, the output will be high, and when the input signal is above Vref, the output will be low. The Schmitt-trigger acts as a switch, providing a clean digital signal to the output.

The SN74AHC1G14DCKT is a dual inverting Schmitt-trigger logic gate and is used in various applications. It is used in digital systems that require clean digital signals, communication systems, and signal-processing applications. It has two independent gates and draws low power. It can handle up to a 400KHz input frequency at a 3.3 supply voltage and has a 5MHz minimum guaranteed speed. The device compares the input signals with a reference voltage, Vref, to determine the output, providing a clean digital signal.

The specific data is subject to PDF, and the above content is for reference