SN74AHC245QDWRG4Q1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Logic is the basis of modern digital electronics and the advanced integrated circuits (ICs) of today rely heavily on it. SN74AHC245QDWRG4Q1 is one such IC, and it is classified under the family of logic-based Buffers, Drivers, Receivers, Transceivers. It is widely used in a number of digital electronics applications, and this article explains the application field and working principle of SN74AHC245QDWRG4Q1.

SN74AHC245QDWRG4Q1 is an octal buffer and line drivers and it features smart logic clock skews and advanced power-down detection capabilities. Salient features of the device include:

• Low quiescent current
• Low power requirements
• Wide operating voltage range from 2.7V to 3.6V
• High power speed – 160 MHz
• Excellent bus hold – eliminates the need for external pullup/pulldown resistors

The SN74AHC245QDWRG4Q1 is a typical example of an octal non-inverting buffer/line driver and it is useful in applications requiring relatively fast data transmission over relatively long distances. Its quiescent current is exceptionally low and power dissipation is twice that of other similar devices. It has an 8-bit bidirectional bus interface port with configurable input, output, and tri-state configuration facility. When inactive, the 8 pins form a “low” logic state. The inputs have strong bus-hold circuitry that eliminate the need for external pull-up resistors.

The typical way to connect the device is with the ‘Enable’ pin (EN) connected to ground, the ‘Input’ pin (IN) connected to ground, and the ‘Output’ pin (OUT) connected to the associated power supply pin. This ensures that the device is always enabled and ready to receive data. The input data is fed into the device on the ‘Input’ pin, while the ‘Enable’ pin drives the output of the device to the high logic state. This allows the output to be driven to the state specified by the ‘Input’ pin.

The device is also able to detect power-down conditions. This is achieved by monitoring the voltage level on the ‘EN’ pin. If the voltage goes below the specified threshold, then the device outputs a high logic state. This can be used to shut off power to the device, or trigger an event. This makes it ideal for applications in portable electronics and battery-powered systems, as it can reduce power consumption.

In addition, the SN74AHC245QDWRG4Q1 is also able to provide clock-synchronization. This is done by using a separate clock signal (either positive or negative edge) to drive the output. This ensures that the output of the device is synchronized to the clock signal, allowing for more efficient data transfer. This feature makes the device ideal for applications requiring clocked interfaces, such as Serial Peripheral Interfaces, Inter-Integrated Circuits and Universal Synchronous Asynchronous Receiver Transmitter (USART) buses.

The SN74AHC245QDWRG4Q1 is a popular and versatile octal buffer and line drivers. It is used in a wide range of applications and is noted for its low quiescent current, low power requirements, and wide operating voltage range. It features smart logic clock skews, advanced power-down detection capabilities and the ability to provide clock-synchronization. This makes the device suitable for a variety of digital electronics applications.

The specific data is subject to PDF, and the above content is for reference