SN74AHC367DGVRG4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

SN74AHC367DGVRG4 Application Field and Working Principle

The SN74AHC367DGVRG4 is part of the Texas Instruments SN741xx family of octal bus transceivers (OBT) and buffers. It is a high-gain analog multiplexer, which is a single chip that can switch one of several analog signals under the control of a microprocessor. The SN74AHC367DGVRG4 is an octal bus transceiver that is used to simultaneously exchange data between two parallel systems over a dual-directional bus. It has two 3-state outputs and two 3-state inputs with built-in pull-up resistors which make it suitable for bus-oriented systems.

Category: Logic - Buffers, Drivers, Receivers, Transceivers

Application Field

The SN74AHC367DGVRG4 is designed for general-purpose, low-cost digital systems applications. It is ideal for buffering, driving and receiving logic signals. This device is specifically designed for high-speed digital data bus systems using 8-bit and 16-bit devices. It is also suitable for bus-oriented control applications such as microprocessors, signal processors, computer systems, low-voltage logic, memory and interfaces.

Key Features

• High speed operation: 12 ns propagation delay
• Low power consumption < 20μA at 5 V
• Buffers and drivers available
• High voltage rating of up to 24 V
• Low logic-to-logic load capacitance 2.6 pF
• TTL, CMOS compatible

Working Principle

The SN74AHC367DGVRG4 is an octal bus transceiver that exchanges data between two parallel systems over a dual-directional bus. It has two 3-state outputs and two 3-state inputs with built-in pull-up resistors. It is connected to the bus via two pairs of buffers (A, B). The two inputs (A and B) each switch between the output of one of the two buffers, depending on the logic level at one of the two control inputs labelled A and B. When the control input is asserted (1 or "high"), the buffer is enabled and the correct output is selected. When the control input is negated (0 or "low"), the buffer is inhibited and the output remains in a high impedance state.

The SN74AHC367DGVRG4 is an octal bus transceiver designed to simultaneously exchange data between two parallel systems with low power consumption. It contains eight 3-state outputs and eight 3-state inputs with pull-up resistors that interface to the system buses. The device operates at up to 12 ns propagation delay and up to 24 V. It is ideal for buffering, driving and receiving logic signals and is suitable for high-speed, low-voltage digital data bus systems.

The specific data is subject to PDF, and the above content is for reference