SN74AHCT16540DLR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Logic- Buffers, Drivers, Receivers, Transceivers are very important in our daily life. And the SN74AHCT16540DLR is a high-performance octal D-type transparent latch with flow-through architecture that is ideally suited for multiplexed data bus organization. It is basically a logic level translator, and it controls data flow from one logic side to the other. It is a type of logic interface which helps to keep the logic of the data in a consistent format.

Introduction

The SN74AHCT16540DLR is an octal D-type transparent latch which is produced by Texas Instruments. It is available in 16-pin PDIP, SOIC, and TSSOP packages. This device uses a flow-through architecture which simplifies board design and routing, this is because it can be inserted directly in between two logic level voltages. The SN74AHCT16540DLR operates from both 3.3V and 5V supplies and converts signals from one logic family to the other. It features complementary outputs drive which allows for increased drive capability and improved noise margin in applications.

Application Fields

Typical applications of the SN74AHCT16540DLR include:

• Control buses in microprocessor and microcontroller systems
• Interface systems designed to operate between two logic families
• Bus interfaces and protocol controllers
• Data formatting and translation components.

Working Principle

The SN74AHCT16540DLR operates with two logic voltage levels. It is designed to accept a binary input signal on one side and convert it to the opposite state on the other side. This is achieved using the chip’s internal logic circuits and the flow-through architecture. The device is designed to accept both power and logic signals at the same time, which helps to minimize board routing. The chip is suitable for use in applications which require multiplexed signals.

The SN74AHCT16540DLR is an octal D-type transparent latch which consists of four D-type transparent latches. Each latch has four inputs, four outputs, and an active LOW enable (E) input. All inputs and outputs on a latch are completely independent and can operate concurrently with each other. This allows for increased productivity when dealing with multiplexed data systems.

The E input on a latch works as an active LOW enable input. When the E input is held LOW, the outputs on the latch are held HIGH and data transfers can occur. When the E input is held HIGH, the outputs are disabled and no data is transferred. This allows for greater control in applications which require data which is provided by multiple sources.

Conclusion

The SN74AHCT16540DLR is a versatile logic level translator which is suitable for multiplexed data bus applications. This device is produced by Texas Instruments and is available in 16-pin PDIP, SOIC, and TSSOP packages. The SN74AHCT16540DLR operates from both 3.3V and 5V supplies and is ideal for applications which involve high-speed performance. Furthermore, it can be used as a data formatting and translation device.

The specific data is subject to PDF, and the above content is for reference