SN74AHCT1G08DCKR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

SN74AHCT1G08DCKR is a device designed to respond to logic levels. The SN74AHCT1G08DCKR is a single 2-Input AND Gate. It contains two independent gates, each of which has two input terminals. It has a Schmitt-trigger input stage which ensures immunity from noise typically found in low-voltage digital systems. Outputs of the two gates can be tied together for a two-input AND gate. The SN74AHCT1G08DCKR is part of the Texas Instruments’ standard Logic family.

The SN74AHCT1G08DCKR has a range of applications, including driving LED and logic interfacing. This device is used in automotive, consumer and industrial equipment, consumer electronics, and digital logic systems. The device provides good noise immunity and can easily be connected as a bus buffer to transmit and receive data. It is also suitable for driving long lines over 20 cm, as well as for driving CMOS devices.

The operating voltage of the SN74AHCT1G08DCKR is 3V to 3.6V and the minimum pulse width is 450ns. It has very low static power dissipation in normal operation. The typical noise immunity is 10 ns. The device is capable of driving up to 64 mA load with current transfer ratio (CTR) accurately controlled. The propagation delay is fast, typically 550 ns. It has direct connection to TTL and can be directly connected to CMOS without the need for pull-up and pull-down resistors.

The working principle of the SN74AHCT1G08DCKR is based on the logic level sensing capability. If a logic low is applied to the two inputs, the output of the device is always logic high, regardless of the logic level applied. The output will remain high even if the corresponding output of the opposite input is high. This device supports two input levels in the range of 1.8V to 3.6V and can be set up in the low-power operating mode. The device will respond to the logic levels 0.8V to 3V and is compatible with both TTL and CMOS logic.

The SN74AHCT1G08DCKR provides very good noise immunity and is fast to switch. It is designed to work at 3V and 3.6V supply voltage range, which makes it suitable for low-voltage systems. Additionally, it has very low static power dissipation and can easily be connected as a bus buffer to transmit and receive data. The device has high load driving capabilities and can easily drive long lines over 20 cm.

The specific data is subject to PDF, and the above content is for reference