SN74AHCT1G126DCKT

Series:	74AHCT
Packaging:	Tape & Reel (TR)
Part Status:	Active
Logic Type:	Buffer, Non-Inverting
Number of Elements:	1
Number of Bits per Element:	1
Input Type:	--
Output Type:	3-State
Current - Output High, Low:	8mA, 8mA
Voltage - Supply:	4.5 V ~ 5.5 V
Operating Temperature:	-40°C ~ 125°C (TA)
Mounting Type:	Surface Mount
Package / Case:	5-TSSOP, SC-70-5, SOT-353
Supplier Device Package:	SC-70-5
Base Part Number:	74AHCT1G126

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

SN74AHCT1G126DCKT (commonly written as SN74AHC1G126DCKT) is a non-inverting buffer from Texas Instruments\'s Logic - Buffers, Drivers, Receivers, Transceivers family of logic gates. It acts as a 1:1 mirror for the input signal. Buffers are useful for regenerating, driving and translating digital signals. They are especially useful when an output load is fast and requires a longer supply voltage than the source output. SN74AHCT1G126DCKT is ideal for low power applications as it consumes very little power and operates at a slow speed.SN74AHCT1G126DCKT is an active low, 1-input Non-Inverting Logic Buffer. It can be used in a wide variety of applications, e.g. as a circuit element in a digital bus, as a digital interface buffer, or as a simple 1-input buffer. It is a member of the 74AHC family, which is part of the broader TTL family of digital logic.The SN74AHCT1G126DCKT has a single input and is designed to accept either a voltage of 0 V – 3V (high) or 3.3V – 7V (low). Its output is a mirror image of its input, meaning if the input is high, the output will be high. The advantage of this is that it eliminates the need for an inverter, allowing it to provide the same functionality with fewer components.The SN74AHCT1G126DCKT has an output level of 3.3V, and is designed to be compatible with both the TTL (3.3V) and 5V logic families. The output impedance of the SN74AHCT1G126DCKT is low, which makes it ideal for applications where the output load requires a higher supply voltage than the source. Its low output impedance also makes it well-suited for high frequency and low capacitance applications, such as driving transmission line and signal conditioning.The SN74AHCT1G126DCKT also has a wide operating temperature range of -40 to +125 degrees Celsius, which makes it ideal for use in extreme temperature conditions. It also has a TTL compatible Enable (EN) pin, allowing the buffer to be turned off or on via external logic control.Overall, the SN74AHCT1G126DCKT is a low power, low impedance, TTL compatible non-inverting logic buffer. It is well-suited for a wide variety of applications, including digital buses, digital interfaces, transmission lines and signal conditioning applications. It is also a cost-effective solution for applications that require a low power, high speed buffer.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description