SN74AHCT367DBR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SN74AHCT367DBR is a logic buffer used as a signal connection between an integrated circuit (IC) or multiple ICs. Its primary signal transmission role is to supply signal isolation and the ability to increase and decrease signal loading, depending on the device’s design. It is a 16-bit octal buffer with high-speed performance. This octal buffer is ideal for applications in which multiple logic signals need to be routed and exchanged quickly. Its key features include asymmetrical output, TTL logic compatibility, low supply current, active bus hold, and low power dissipation. With these features, the SN74AHCT367DBR is an excellent device for applications needing buffering, such as microprocessor and microcontroller interfacing.

The SN74AHCT367DBR uses a bipolar TTL circuit, which is a combination of a PMOS p-channel transistor and an NMOS n-channel transistor. The PMOS transistor will draw current into its source terminal, D, when the logic signal at the base is high. The NMOS transistor pulls the D line to ground when the logic signal is low. This combination allows the device to switch between logic “0” and logic “1” states quickly and with minimal voltage transitions. The SN74AHCT367DBR has an active bus-hold circuit. This means that the device will maintain the logic level on its outputs, even when the data lines are not driven, allowing the device to continue functioning when power is lost.

The SN74AHCT367DBR is a 3-state device, meaning that it can be set in either the logic “0” state, the logic “1” state, or the high impedance state. The high impedance state is designed to prevent short circuits from occurring when multiple devices are connected together on a single line. The SN74AHCT367DBR uses an asymmetrical output buffer. This design ensures that the output devices are better protected against possible overvoltage conditions. Additionally, the output buffer is designed to minimize unwanted noise at the output.

The SN74AHCT367DBR is a versatile device, it can be used in a variety of applications. It can be used as a data selector, memory address multiplexer, clock signal buffer, and buffer for system buses. Additionally, it can be used in circuits requiring high speed operation, such as inter-chip signal buffering, signal splitting, and signal translation.

In conclusion, the SN74AHCT367DBR is a logic buffer used primarily for signal transmission and transfer. It is a 16-bit octal buffer with high-speed performance and is ideal for applications requiring multiple logic signals to be routed quickly. It uses a bipolar TTL circuit and has an active bus-hold circuit that keeps the device functioning even when power is lost. It also features an asymmetrical output buffer to better protect against overvoltage conditions and reduce unwanted noise. The SN74AHCT367DBR is a versatile device, it is useful in a variety of applications and can be used as a data selector, memory multiplexer, clock signal buffer, and buffer for system buses.

The specific data is subject to PDF, and the above content is for reference