SN74ALS374ADWR Integrated Circuits (ICs)

Series:	74ALS
Packaging:	Tape & Reel (TR)
Part Status:	Active
Function:	Standard
Type:	D-Type
Output Type:	Tri-State, Non-Inverted
Number of Elements:	1
Number of Bits per Element:	8
Clock Frequency:	35MHz
Max Propagation Delay @ V, Max CL:	--
Trigger Type:	Positive Edge
Current - Output High, Low:	2.6mA, 24mA
Voltage - Supply:	4.5 V ~ 5.5 V
Current - Quiescent (Iq):	19mA
Operating Temperature:	0°C ~ 70°C (TA)
Mounting Type:	Surface Mount
Package / Case:	20-SOIC (0.295", 7.50mm Width)
Base Part Number:	74ALS374

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

The SN74ALS374ADWR is a high-performance dual-channel flip-flop, comprising two high-speed 4-bit binary registers and a pair of clock allow gating. The device is used in a variety of applications and has a wide range of operating voltage conditions. It is one of the leading products in logic - Flip Flops.

SN74ALS374ADWR Application Field and Working Principle

The SN74ALS374ADWR is mainly used for memory storage, address decoding, serial data conversion and arithmetic operations. Its primary feature is its ability to store and preserve data from one clock cycle to the next. It is suitable for electronic system designs that require quick calculations and an enhanced accuracy level. In addition, the SN74ALS374ADWR can be used for waveform re-clocking applications, frequency division and circuit switching operations.The SN74ALS374ADWR works by receiving two separate clock signals and then internally latching data into the two channels. Data after being stored within the chip the state of the outputs can be changed simply by applying the clock input. An \'Enable\' pin allows control of the devices transfer function, preventing unnecessary data movements.The SN74ALS374ADWR can operate in three different modes, differentiating it from most standard dual-channel devices. These modes are \'Latching Mode\', \'Transparent Mode\' and \'Transparent/latching Mode\'. \'Latching Mode\' is the most common operating mode, ensuring that data is held in the device until a rising edge of the clock is detected. \'Transparent Mode\' is useful for data transmission applications, with any changes to the inputs being immediately reflected on the outputs. Lastly, \'Transparent/Latching Mode\' combines both the above mentioned modes, depending on the input data. The two significant types of SN74ALS374ADWR chips are non-inverting and inverting. A non-inverting SN74ALS374ADWR can be used for either parallel or serial data processing, whereas an inverting SN74ALS374ADWR can be used for parallel data processing only. Non-invertingSN74ALS374ADWRs can also be used for feedback loops and serial communication algorithms due to their higher speed and superior performance.Finally, the SN74ALS374ADWR enables the construction of reliable and secure data storage and computing circuits, due to its data retention capability and inversion performance. This makes it an ideal choice for applications requiring reliable and low latency data storage or processing, such as timing/frequency measurement, motion control and communication systems.

Conclusion

The SN74ALS374ADWR is a powerful high-performance dual-channel flip-flop that can be used for a wide range of applications. The device operates in three different modes, Latching, Transparent and Transparent/Latching, allowing the user to design reliable and secure data storage or processing systems. With the SN74ALS374ADWR, the user is able to create secure and reliable data storage and computing circuits.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description