SN74ALS648ADWR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SN74ALS648ADWR is a type of logic-buffers, drivers, receivers, transceivers. It is manufactured by Texas Instruments and is used as an 8-bit universal transceiver. The hardware logic-buffers are designed to drive LED displays, lamps and LEDs, and can also act as latch control lines in digital logic circuits. The SN74ALS648ADWR consists of eight flip-flops, each having an enable enable line that can be used both to enable the output stage and to synchronize the circuits.

The SN74ALS648ADWR typically uses 3.3 or 5 volts for power supply, and its output voltage is tolerant of up to 20 volts. It can also work with lower supply voltages as low as 0.5 volts. When the buffer is enabled, its output stage is biased to the logic level of one and when it is disabled, its output is pulled to the logic level of zero. The SN74ALS648ADWR has a switching frequency of 25MHz and can be used to drive multiple logic gates simultaneously.

The SN74ALS648ADWR is also commonly used for address conversion in applications that support both asynchronous and synchronous serial communications, such as in a parallel-to-serial converter. It can also be used as a bus interface controller, which allows two different systems to communicate. The logic-buffers can be configured to operate either as an eight bit wide multiplexer or an eight bit wide demultiplexer.

The enable line of the SN74ALS648ADWR plays an important role in the operation of the circuit. When the enable line is set to one, the output is enabled and the output can be either one or zero depending on the input signal. However, when the enable line is set to zero, the outputs are disabled and the circuit is in idle mode. The enable line is used to select the state of the circuit, either enabling or disabling the output stage.

The SN74ALS648ADWR can also be used for transceiver applications, such as in data transmission and receiving. The transceiver is capable of sending and receiving data at high speeds over long distances and can be used for both wired and wireless communications. The transceiver can also be used for signal conditioning and analog-to-digital conversion. By combining multiple transceivers, the data rate can be increased and the complexity of the signal processing can be reduced, improving system efficiency and performance.

The SN74ALS648ADWR is designed to be a highly efficient and relatively low-cost solution for a wide range of applications. The 8-bit transceivers provide high speed switching, low power consumption, high noise immunity and are relatively resistant to electromagnetic interference. The SN74ALS648ADWR is commonly used in digital logic circuits, analog-to-digital and digital-to-analog converters, address and data conversion and serial communication applications. It is also used in applications related to the control of industrial and commercial lighting, as well as in instrumentation and telecommunication systems.

The specific data is subject to PDF, and the above content is for reference