SN74AUC16240GQLR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

SN74AUC16240GQLR is a logic device from Texas Instruments, categorized under logic buffers, drivers, receivers, transceivers, that is highly capable of aiding in designing a variety of digital systems. This device consists of a 2:4 demultiplexing buffer, used for interfacing between 2 identical buses, providing a level of flexibility not present in many other chips. SN74AUC16240GQLR works with many logic families, namely Low Voltage AC (LVAC), Low Voltage TTL (LVTTL), and the somewhat slower Low Voltage HTL (LVHTL).

The SN74AUC16240GQLR is based on the four bus architecture using two Select lines (S1/S0). Using this architecture, the device can easily interface and switch between two similar buses. In addition, each input port of the SN74AUC16240GQLR works independently, enabling the device to transfer data at high speeds and with high integrity, in both directions. As a result, this buffer is highly suitable for a variety of application, including instruction fetching, address and data multiplexing, pending information transfer, and real-time data gathering.

The SN74AUC16240GQLR has active low enable and select inputs, both of which are used to control the connection of input bus A with bus B. The enable input (EN) must be taken low for the device to be operational. When EN is held low, S1 and S0 are used to select the bus from which the data either is to be driven on the output port, or from which the data is to be monitored on the input port. Depending on the coding of the select lines, a total of four different demultiplexing options are supported; driving data to all ports of the output bus, receiving data from only one port of the input bus, or both. Each of the four ports A0, A1, A2 and A3, is associated with a corresponding port B0, B1, B2 and B3. However, it is possible to reverse the data flow direction by either tying the enable input EN high, or select inputs S1/S0 at logic high.

The SN74AUC16240GQLR also features a variable slew rate and TTL noise immunity, which improves the performance of the device in noisy systems. This device has a maximum frequency rating of 333 MHz, and a -3 dB bandwidth of 530 MHz in LVHTL mode. The device also operates between a voltage supply range of -3V to +3V.

When designing digital systems, the SN74AUC16240GQLR, can provide a very effective solution for a variety of applications.It can be used to route or transfer data from one bus to another. The device can also be used for demultiplexing, where data is sent to one of several output lines depending on the state of the select signals. The device is also useful when achieving high speed data transfer in one direction: either all the way from A-to-B, or B-to-A.

Overall, Texas Instruments’ SN74AUC16240GQLR is a highly versatile, powerful, and cost-effective device that makes up an essential part of any digital design. Not only is it compatible with a wide range of logic families, its adjustable slew rate and TTL noise immunity also combine to offer high speed operation while maintaining the integrity of the data.

The specific data is subject to PDF, and the above content is for reference