SN74AUC1G17YZAR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SN74AUC1G17YZAR is a single-supply, single-pole, double-throw bus switch from Texas Instruments. This switch is a low-power, logic-level, one-channel device with a single-channel configuration. It has a logic level threshold of 0.8V and features very low-power operation. The operating temperature range is -40°C to 125°C. It has two pairs of low-capacitance, low-resistance transmission lines, one pair for input, and one pair for output. This switch configures the transmission line either through the common terminal or through the normally closed (NC) or the normally open (NO) contact. Each of these configurable pairs can be connected or disconnected independently of each other. Thus, the SN74AUC1G17YZAR switch is used to connect or disconnect two or more nodes on a bus.

The SN74AUC1G17YZAR has a wide array of applications and is ideal for digital logic systems. It can be used in the connection and disconnection of nodes in a bus system, allowing a wide variety of different logic signals to be optimized. It is also suitable for digital-to-analog and analog-to-digital conversion, multiplexing and demultiplexing, and in data transmission and transfer across different systems. The switch can also be used in multiple switch matrices, for redundancy and for connecting multiple ports to a single device.

The SN74AUC1G17YZAR is powered by a single voltage source from 1.65V to 5.5V. The switch has an input resistance of 1.5Ω per line and an output resistance of 20Ω per line. The output current is limited to 1mA per pin. The switching time response is typically 5ns, and the enable/disable time is 4ns. The high-input level threshold is 0.8V and the low-input level threshold is 0.4V. The input and output terminals are TTL/CMOS compatible, and the switch can also be used in numerous applications and circuits with different logic levels.

The SN74AUC1G17YZAR switch is categorized under the Logic - Buffers, Drivers, Receivers and Transceivers. Buffalo is a digital buffer device used to improve the noise margin and power supply accuracy of digital systems. It is also used to maintain full logic swing at the load, and to reduce the effects of load capacitance and slew rate. These features make it suitable for driving both high and low capacitance loads. The other categories like Drivers and Receivers are used for converting a digital signal into an analog signal and vice versa, respectively. They are useful in communication systems and other control applications. Lastly, a Transceiver is a combination of transmitters and receivers, used to send and receive digital signals.

In summary, the SN74AUC1G17YZAR is a single-channel, single-pole, double-throw bus switch from Texas Instruments. This switch is suitable for a wide range of digital logic applications and systems. It is powered by a single voltage source and has very low power consumption. The input and output terminals are TTL/CMOS compatible, and the switch can be used in circuits with different logic levels. It is categorized as part of the Logic - Buffers, Drivers, Receivers, and Transceivers family.

The specific data is subject to PDF, and the above content is for reference