SN74AUC1G74RSERG4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Logic Flip Flops are a classic form of logic circuit that is used to store binary-level digital logic values. The SN74AUC1G74RSERG4 is a dual-positive-edge triggered Flip-Flop that is used in a variety of applications. The SN74AUC1G74RSERG4 Flip-Flop is designed to operate in an array of digital circuits that require fast-acting, low-power flip-flop operations.

This device is ideal for use in synchronous and asynchronous logic applications. It is equipped with two separate Flip-Flop outputs that convert transient input signals into a stable output signal. The SN74AUC1G74RSERG4 Flip-Flop operates in a singular mode, where the two outputs act independently of one another and produce a single-ended output signal.

The SN74AUC1G74RSERG4 Flip-Flop operates with a positive-level logic input, which is triggered by a rising edge. When activated, the inputs immediately go to the high state and remain there until the positive edge is detected again. The output signals remain in the same state once the positive edge has been detected. The device is also equipped with an asynchronous reset input, which can be used to reset the circuit in case of a system failure.

The device operates in a two-mode switching configuration. In the first mode, the two output signals are switched alternately and respond to the input at the same time, while in the second mode, the two outputs are switched simultaneously. The device can also be configured to operate in synchronous or anti-parallel modes.

The SN74AUC1G74RSERG4 Flip-Flop is used in applications such as seismic recording systems, memory architectures, data-acquisition systems, time-division multiplexing, and other complex data-processing applications. The device can also be used in power switching, data logging, and coordinate systems. Additionally, the device is ideal for use in embedded systems, where small form-factor Flip-Flop designs are necessary.

The SN74AUC1G74RSERG4 Flip-Flop is designed for operation up to 200MHz, however, its switching speed is dependent on the input and output logic levels. This device is rated for operation at logic levels between 1.2V and 5.5V and operates with a maximum operating temperature of 125°C. This device is also equipped with ESD protection and low power consumption.

In summary, the SN74AUC1G74RSERG4 is a dual-positive-edge triggered Flip-Flop that is ideal for use in digital circuits that require fast-acting, low-power flip-flop operations. This device is used in a slew of applications such as seismic recording systems, memory architectures, data-acquisition systems, time-division multiplexing, embedded systems, and other complex data-processing applications. This device is designed for operation up to 200MHz and rated for operation at logic levels between 1.2V and 5.5V with a maximum operating temperature of 125°C.

The specific data is subject to PDF, and the above content is for reference