SN74AUP1G06DSF2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Logic gates and inverters are the foundation of digital logic systems, and the SN74AUP1G06DSF2 stand-alone logic gate configured in inverting mode is one of the most commonly used components for this purpose. The SN74AUP1G06DSF2 acts as a single logic gate and has an open-drain configuration, meaning it can be used as aswitch or an inverter depending on the application. This makes the SN74AUP1G06DSF2 an all-around logic gate for applications where a single logic element is required.

The SN74AUP1G06DSF2 single, CMOS pull-up logic gate configured in inverting mode is offered in a very small, 6-Pin thin shrink small outline package (TSSOP) and comes in a variety of different grades which are specified to meet different speed grades. Its operational voltage range starts at 1.8V, making it an ideal choice for low-voltage applications, and it comeswith an integrated power-on reset and temperature compression circuits.

The SN74AUP1G06DSF2 is most commonly used in low-power and portable applications such as PDA and cell-phone keypad scanning and handset interface protocol conversion. It can also be used in clock and timing circuits, as well as industrial control, automotive, medical and aerospace applications. Additionally, the SN74AUP1G06DSF2 is used as a direct replacement for TTL-based gate designs with improved noise immunity and higher operating speeds over comparable TTL gates.

The SN74AUP1G06DSF2 logic gate is essentially an integrated circuit containing a single logic gate, configured in inverting mode, with open-drain outputs. This allows the output to be pulled either high or low depending on the application. It acts as an inverting logic gate, meaning that it takes an input signal and produces an output signal that is the inverse of the input. It has two operating modes, either active high or active low, depending on the desired output. At active high, the gate will produce a high output when the input is high, while at active low the gate will produce a low output when the input is low. The SN74AUP1G06DSF2 also features a power-on reset (POR) circuit which powers up the circuit when the input voltage is greater than 1.35V, guaranteeing that the logic gate receives the correct input voltage.

In the most common application, the SN74AUP1G06DSF2 is used in its open-drain / totem-pole configuration as an inverting logic gate. The logic gate is powered by an external voltage supply, with the input voltage driving the gate output through a single pull-up resistor. This is the typical configuration when used as a switch. The output voltage is then inverted and either 1 or 0 depending on the input voltage. When used as an inverting logic gate, the input voltage is sent to the gate, and the output voltage is inverted, producing an output that is the inverse of the input.

The SN74AUP1G06DSF2 is also designed with a temperature compensated circuit which monitors the supply current and adjusts the output voltage accordingly, compensating for any variations in temperature. This ensures that the voltage is always within the specified range, regardless of temperature. This circuitry is particularly useful for automotive and aerospace applications where temperature variations are common.

The SN74AUP1G06DSF2 is an ideal choice for a variety of low-power applications and is ideal for replacing digital TTL components in legacy applications. It is designed with an integrated power-on reset circuitry, a temperature compensated circuit and an open-drain configuration. The SN74AUP1G06DSF2 is also offered in a variety of speed grade options and is particularly suited for low-voltage applications. It offers increased operational speed over comparable TTL gates and improved noise immunity making it an ideal choice for automotive and aerospace applications.

The specific data is subject to PDF, and the above content is for reference