SN74AUP1G07DBVRE4

Series:	74AUP
Packaging:	Tape & Reel (TR)
Part Status:	Active
Logic Type:	Buffer, Non-Inverting
Number of Elements:	1
Number of Bits per Element:	1
Input Type:	--
Output Type:	Open Drain
Current - Output High, Low:	-, 4mA
Voltage - Supply:	0.8 V ~ 3.6 V
Operating Temperature:	-40°C ~ 85°C (TA)
Mounting Type:	Surface Mount
Package / Case:	SC-74A, SOT-753
Supplier Device Package:	SOT-23-5
Base Part Number:	74AUP1G07

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

The SN74AUP1G07DBVRE4 is part of the AUP logic family, belonging to the Logic - Buffers, Drivers, Receivers, Transceivers category. It is a single-supply, 5-V tolerant, single-directional buffer designed to provide signal buffering, level shifting, and performance-critical signal isolation. The SN74AUP1G07DBVRE4 comes in a space saving and low-power-consumption package, making it ideal for resource-constrained applications.

Application Field

The SN74AUP1G07DBVRE4 can be used in a variety of applications, including industrial automation, communications, and embedded systems. It is particularly well-suited for use in application-level mounting, such as multi-display systems and remote antennas. The buffering capability of the SN74AUP1G07DBVRE4 makes it a great choice for applications that require data and signal isolation and reliable communication interface between devices.The device\'s 5-V tolerant logic level makes it an ideal choice for applications operating on different voltage levels. For example, the SN74AUP1G07DBVRE4 can be used to bridge a 5 V level signal from one device to a 3.3 V level signal of another device. In addition, the SN74AUP1G07DBVRE4 can be used in low-power applications, such as battery-powered devices, since it has a low supply voltage requirement (1.9 V to 3.6 V).

Working Principle

The SN74AUP1G07DBVRE4 is controlled by an active-low enable signal (EN). To activate the buffer, EN must be taken low. The input signal i.e. Input A, is buffered and output as Output B.The output signal is high impedance when EN is taken high, and is actively driven low or high when EN is taken low, depending on the state of Input A. When EN is taken high the internal pullup of Output B hold the Output B at the high logic level, for negative logic devices the internal pull-down holds the Output B at low logic level.The logic levels of the SN74AUP1G07DBVRE4 are 5-V tolerant, and the output levels are determined by the voltage applied to the input (Input A). If Input A is less than 0.8 x VSS (power supply voltage), the output will be a low level. If Input A is greater than 0.8 x VSS and less than 1.2 x VSS, the output will be a high level. When the input voltage is outside this range the output will be indeterminate.

Conclusion

The SN74AUP1G07DBVRE4 is part of the AUP logic family, and belongs to the Logic – Buffers, Drivers, Receivers, Transceivers category. It is a single-supply, 5-V tolerant, single-directional buffer that can be used for level shifting, signal buffering, and signal isolation in a variety of applications. Its logic levels are 5-V tolerant and its output levels are determined by the voltage applied to the input (Input A). The internal pull-up or pull-down resistor on Output B holds the output signal at the desired logic level.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description