SN74AUP2G32DCUR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Logic gates and inverters play essential roles in digital circuits and are used in a variety of commercial and consumer applications. The SN74AUP2G32DCUR is a logic gate and inverter integrated circuit (IC) designed by Texas Instruments to take a single logic input and output two separate logic signals. The SN74AUP2G32DCUR enables two logic gates in a single package, thus saving on board space, components and power.

The SN74AUP2G32DCUR contains two 2-input AND gates with Schmitt trigger input (STI) circuits, each of which is capable of driving up to six standard TTL or CMOS loads. The AND gates are typically used for logic functions such as decoders, multiplexers, data selectors and parallel adders. The Schmitt trigger input (STI) circuits maintain the logic outputs despite any glitches at the input. Moreover, in comparison to stand-alone logic gates, the SN74AUP2G32DCUR has better noise immunity and input hystersis.

The SN74AUP2G32DCUR is commonly used in applications such as control systems, logic circuits, computing systems and telecomms. It is capable of drawing minimal power dissipations and is manufactured with advanced silicon-gate CMOS process technology. This allows the device to operate at higher speeds while drawing smaller currents than standard TTL logic gates. The device is characterized for operation from 0 °C to 70 °C and is available in 8-pin VSSOP, TSSOP and PDIP.

The SN74AUP2G32DCUR IC operates by taking two logic inputs and producing two logic outputs. On the inverting side, the two logic inputs are differentially compared to two thresholds. If the logic signal is below the lower threshold or above the upper threshold, the output is forced to a high level. If the logic signal is between the two thresholds, the output will be forced to a low level. This switching action can help reduce noise on the signal.

On the non-inverting side, the two logic inputs are differentially compared to two thresholds. If the logic signal is above the upper threshold or below the lower threshold, the output is forced to a low level. If the logic signal is between the two thresholds, the output will be forced to a high level. This switching action helps to eliminate glitches that can cause system errors.

The SN74AUP2G32DCUR is a useful and cost-effective device for many applications requiring logic and/or logic-controlled circuit functions. It can provide significant space, cost and power savings and is suitable for use in a wide variety of consumer and commercial electronic products.

The specific data is subject to PDF, and the above content is for reference