SN74BCT2245DWR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SN74BCT2245DWR is a high performance, low voltage, 8-bit transceiver/register designed to interface data in mixed 5V/3V systems, or 5V ±10% environments. It is designed to transfer data on eight bits at a time in either direction and is triggered on the rising edge of buffered clock (CLK). Each input/output buffer has an independent active-low output Enable (OE) using 3-state outputs. The 3-state output enables are asynchronous and can be used to reduce power consumption and interface to other static components.

The SN74BCT2245DWR has a set of control signals which allow it to be configured for various levels of performance and data protection. When configured for Single-Data Rate (SDR), it supports a maximum bus frequency of 66 MHz, and when configured for Double-Data Rate (DDR) it supports a maximum bus frequency of 132 MHz. The SN74BCT2245DWR also supports 4-bit and 8-bit data widths, allowing it to be used for various types of data transfer.

The SN74BCT2245DWR is a full-duplex transceiver/register, meaning data can be transferred in both directions simultaneously. It is also a true differential signal device, meaning that data is sent and received through different signals. This allows the SN74BCT2245DWR to minimize crosstalk and noise when operating in a noisy environment.

The SN74BCT2245DWR is primarily used in consumer and industrial applications requiring high-speed data transfer. Examples of consumer applications include video streaming, digital video recorders, digital cameras, and consumer electronics. Industrial applications include robotics, medical instrumentation, test and measurement equipment, as well as military and aerospace applications.

In terms of working principle, the SN74BCT2245DWR uses differential signaling to enable high-speed data transfer. This type of signaling works by sending data across two wires. One of the wires carries a signal and the other carries an inverse of that signal. This allows the device to reduce power consumption and noise since only one wire needs to be connected for data signaling.

When data is sent, it is encoded with an “8B/10B” protocol, which encodes 8 bits of data as 10 bits. This allows the device to ensure functionality even when faced with noisy signals or interference. The 8B/10B protocol also allows the device to operate at a maximum speed of 66 MHz when operated in Single-Data-Rate mode.

The SN74BCT2245DWR utilizes a clock signal to synchronize data transfers. The clock signal is buffered internally, allowing the device to operate up to 132 MHz when in Double Data Rate mode. The clock has two inputs, rising edge (CLK+) and falling edge (CLK-), and data is transmitted on either the rising edge or falling edge of the clock signal, depending on the mode selected (SDR or DDR).

The SN74BCT2245DWR also supports a number of data-protection features. The device offers 8-bit parity checking and data scrambling when transmitted in single data rate mode. When operated in double data rate mode, it offers 16-bit parity checking and data scrambling. The device also offers 8-bit CRC checking and generation.

Overall, the SN74BCT2245DWR is a high performance, low voltage 8-bit transceiver/register designed to interface data in mixed 5V/3V systems or 5V ±10% environments. It is primarily used in consumer and industrial applications requiring high-speed data transfer and supports data transfer up to 132 MHz with data-protection features. This makes it a reliable and widely used transceiver in various industries.

The specific data is subject to PDF, and the above content is for reference