SN74BCT240DBRG4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

SN74BCT240DBRG4 is a buffer, driver, receiver, and transceiver from Texas Instruments, which is from their Logic family. It is intended to convert TTL and CMOS circuit levels to drive and receive high speed signals or provide low noise buffered output. It features three-state outputs and high-current capability (40A continuous, 80A peak).

The SN74BCT240DBRG4 consists of four buffer/drivers having independent output-enable inputs. A HIGH level on the output-enable input disables the corresponding buffer/driver and places its output in the high-impedance OFF state. This device is designed for 2.0-V to 5.5V VCC operation and is organized as 4-channel buffers/drivers with 15-Ω series resistors in the outputs.

The SN74BCT240DBRG4 is aimed at different application fields such as automotive electronics, 3G/4G cellular, RF applications, medical instrumentation and industrial process control. This device is designed with capabilities to be operated with extreme power supply variation and withstand electrical noise. It has only 1µA leakage current which helps the system to be more efficient.

Talking about the working principle, the input signal enters into 4 stages for the logic process before coming out as an output signal. The first stage is the input stage, where the incoming signal is identified. It also has an input termination resistor to prevent reflections. The next stage is the conversion stage, which contains modulators and filters that convert the data into a signal or digital data and filter out unwanted noise or incorrect data. This is then followed by the voltage control stage. In simpler words, the SN74BCT240DBRG4 will convert the data signal into a voltage signal, or vice versa, in order to control the power supply. Finally, there is the last stage which is the output stage, where the signal is sent to the device for output. This stage contains resistor dividers, output buffers, and additional logic circuitry needed for output.

In conclusion, the SN74BCT240DBRG4 is designed for high-performance applications that need a quick, low-noise and robust signal conversion to increase signal integrity. This device is featured with a variety of protection and drive methodology and operational safety features. With the above mentioned application fields and its working principle, the SN74BCT240DBRG4 proves to be an excellent choice for signal conversion.

The specific data is subject to PDF, and the above content is for reference