SN74BCT244DBR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SN74BCT244DBR is an 8-bit buffer/driver logic device from Texas Instruments and is classified under logic - Buffers, Drivers, Receivers, Transceivers. It is a versatile device that provides an interface between digital circuits and higher-speed digital or analog circuits. It is also used to transfer digital data from one point to another or from one medium to another in high-speed applications. The device has eight non-inverting buffers and is designed to operate with a single 5V supply.

Application field of SN74BCT244DBR

Some of the common applications of SN74BCT244DBR include buffer/driver circuits in digital systems such as microprocessors, microcontrollers, and digital signal processors. It is widely used in data transmission and communication systems, such as CAN bus, Ethernet and USB. It is also used in high-speed automotive and industrial applications, such as in electronic messaging boards.

SN74BCT244DBR is also used for LVDS (low-voltage differential signaling) and TFT (thin-film transistor) power management. In addition, it is suitable for LCD and LED display applications, such as televisions, computer monitors, and mobile phones. In addition, it can be used for LED control, LED lighting control and LED touch-screen applications.

Working Principle of SN74BCT244DBR

The working principle of the SN74BCT244DBR is based on the principle of non-inverting buffer/driver. The device acts as a double-sided buffer, where the output can be driven in either direction, either high (H) or low (L). Each buffer has separate output drivers and active low-level outputs.

The SN74BCT244DBR has two active-low buffers. When the device is enabled, the outputs of the two buffers will be driven to the same logic level, either high or low, depending on the logic level of the input. To disable the device, the enable line needs to be pulled to low logic level. The device will then be powered down, conserving power and avoiding any unwanted disturbances in the system.

The SN74BCT244DBR has eight non-inverting buffers and is designed to operate with a single 5V supply. The device is compliant to the SPI standard and is able to send data at speeds up to 12 Mbps. It is designed to operate in both Logic Low (LOW) and Logic High (HIGH) states, with the minimum input logic voltage being 2.7V.

The SN74BCT244DBR is available in a variety of packages, including DIP, Small Outline Integrated Circuit (SOIC) and Ball Grid Array (BGA). It is a RoHS compliant device and can be used in temperatures ranging from –40 to 125 °C.

In conclusion, the SN74BCT244DBR logic device is an 8-bit buffer/driver logic device, classified under logic - Buffers, Drivers, Receivers, Transceivers. It provides an interface between digital circuits and higher-speed digital or analog circuits and is suitable for high-speed automotive, industrial and communication applications, such as in CAN bus, Ethernet and USB. The device works on the principle of non-inverting buffer/driver and can be powered down to conserve power. It is compliant to the SPI standard and is available in a variety of packages.

The specific data is subject to PDF, and the above content is for reference