SN74BCT543DWRG4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SN74BCT543DWRG4 is a part of the buffer category of logic devices and is a 4-bit transceiver. The device is designed to provide bidirectional transfer of data between two sets of 4-bit ports, each set being unidirectional in two different states. The device is designed to allow bidirectional communication between two systems, typically a system and its peripheral devices.In the logic of devices like these, the data pins on the buffer are input pins and the output pins are the inverted version of the data pins. Hence, in the case of the SN74BCT543DWRG4, the data pins number 1 through 4 are the input pins and the inverted versions of the data pins which are pins 5 through 8 are the output pins.

The maximum voltage supply of the SN74BCT543DWRG4 is 5.5V and the minimum voltage supply is 3V. The SN74BCT543DWRG4 provides two active-low enable pins,E1 and E2. When E1 is active low, it enables the lower four ports that are D3, D2, D1, and D0. E2 on the other hand active low, enables the upper four ports that are D7, D6, D5, and D4. The device is rated to operate from 0°C to 70°C, with storage from -65°C to 150°C.

The SN74BCT543DWRG4 is an octal transceiver that is pin compatible with the SN74AC543DWRG4 and the SN74ABT543DWRG4. As it is compatible with both these devices, the SN74BCT543DWRG4 can be used in place of either the SN74AC543DWRG4 or the SN74ABT543DWRG4, allowing smoother transitions between devices when needed. It has slow output skew and low RFI (Radio Frequency) interference, low power consumption and good noise immunity.

The application fields of the SN74BCT543DWRG4 are wide and varied. In semiconductor design and manufacturing, the device is used for interface between two systems or for interconnection between circuits. It is also used in embedded systems for interfacing different hardware components. It is also used in a variety of applications such as propelling robots, controlling various subsystems in machines, signaling and communications networks, and controlling floppy and hard disk drives.

The working principle of the SN74BCT543DWRG4 is very straightforward. When enabled, the data pins A0 to A3 help transfer input data from one port to the other one. The A4 to A7 inverted pins take on the opposite value (0 or 1) of the A0 to A3, respective of the application. The enable pins E1 and E2 activate/deactivate each set of data pins, allowing the flow of data between two systems.

The SN74BCT543DWRG4 is an octal transceiver that is designed to provide bidirectional transfer of data efficiently. Its application fields are wide, and it provides low power consumption, low RFI interference, and good noise immunity for the user. The device supports two different active-low enable pins and its working principle is relatively straightforward. By making use of it, user can easily achieve efficient data transfer and communication between two systems.

The specific data is subject to PDF, and the above content is for reference