SN74HC175DT

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Logic - Flip Flops are basic digital electronics components which are used to store and manipulate data. They are found in nearly all digital systems, and SN74HC175DT is one such component which is used for storing one digital bit of data. This article will discuss its working principle and application fields.

The SN74HC175DT is a type of simple flip-flop circuit which uses transistor-transistor logic (TTL). It is an edge-triggered flip-flop, which means that it will only change its output when a positive or negative pulse is applied at its inputs. It is designed to be very fast and reliable, with a response time of less than 20 nano-seconds. This is why it is often used in applications which require high speed data processing.

The SN74HC175DT consists of two D-type flip-flops, with each flip-flop occupying one half of the chip. Each half of the chip contains four pins, two inputs and two outputs. In each half, the two inputs are the S and R pins, while the two outputs are labeled Q and QN. The S and R pins control the setting and resetting of each flip-flop respectively. When the S pin is high, the Q output will take the state of the R pin, while the QN output will take the opposite state. When the R pin is high, then the Q output will take the opposite state of the S pin and the QN output will take the same state as the S pin.

The SN74HC175DT can be used in many different applications. One of its most common uses is as a control register in microprocessors and other digital systems. In this application, it can store the current state of the system, allowing for faster processing and input/output. It can also be used as a counter, register, shift register, or delay line, depending on how it is wired. It is also commonly used in computer memory and logic circuits.

In conclusion, the SN74HC175DT is a popular logic component which is used in many different applications. It is a type of edge-triggered flip-flop, and is used to store and manipulate digital data. It has two outputs and two inputs, allowing for a variety of uses. It is also known for being fast and reliable, with a response time of less than 20 nano-seconds. As such, it is commonly used in microprocessors, memory, and logic circuits.

The specific data is subject to PDF, and the above content is for reference