SN74HC273DBRG4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SN74HC273DBRG4 (74HC273) is an 8-bit flip-flop device. It is part of the TTL logic family, and is popularly used in many electronic applications, such as counting, timing, shifting and data transmission. The device can be used as either a simple latch or a set-reset flip-flop.

Applications

The SN74HC273 has been used in a wide range of applications. Scope applications include counter, decoder, data register, and so on. It has been extensively utilized in counting applications, such as tallying web page visits. It is also used to interface microcontrollers with analogue to digital converters and digital to analogue converters, allowing them to store and transmit data.

It is also widely used in alarm systems and security systems, where it is implemented as a trigger. Additionally, the SN74HC273 is utilized widely in computers, such as in memory systems and graphics cards, where it functions as a buffer and latch.

Working Principle

The SN74HC273 is an edge-triggered flip-flop device. Its operation is based on four key input signals. These are the clock, clear, enable and data input signals. When the enable signal is active (high), the outputs will be the same as the inputs (data). The outputs can be reset using the clear signal. The clock signal is used to synchronize the data changes, and propagate the data to the outputs when both enable and clear signals are active.

When both enable and clear are inactive, the outputs of the flip-flop will remain in the same state as it was at the clock\'s rising edge. This allows the data to be stored on the outputs until the clear signal overrides the enable signal. This same process is followed for any and all inputs.

The SN74HC273 also includes an enable signal. When the enable signal is low, the outputs of the circuit will be in a disabled state. This means that any data changes at the inputs of the circuit will not be propagated to the outputs until the enable signal returns to the active (high) state.

The SN74HC273 is a very versatile device, and can be used in a wide range of applications including logic, sequential logic, and shift registers. It is important to note that the SN74HC273 does not feature clock gating, which means that the outputs will always be in the same state as the inputs. This can be a disadvantage when switching between multiple signals.

Conclusion

The SN74HC273 is a very versatile device, and has been used in a wide range of applications. The device is an edge-triggered flip-flop, and its working principle is based on four key input signals. The SN74HC273 has been used in many areas, such as counters, timing and data transmission. Additionally, it has been utilized in alarm systems, security systems, memory systems and graphics cards. The SN74HC273 is a great device for any application requiring a simple and reliable flip-flop device.

The specific data is subject to PDF, and the above content is for reference