SN74HCT02PW

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Logic gates are components of digital electronics that allow for decision making processes, combining or modifying input signals in order to execute desired output decisions. Inverters primarily act as signal modifiers, taking in input signals and outputting their opposite value, or inverted value. SN74HCT02PW is a type of logic gate, more specifically a dual-inverting gate, as it contains two separate inverting channels that operate independently. This device is suitable for all operating systems up to 20V. In this regard, SN74HCT02PW often found application in digital, mixed signal and memory circuit designs where dependable, high-speed performance is crucial.

SN74HCT02PW dual-inverting logic gate typically composed of two n-channel MOSFETs, with sources connected together to common ground. The drain of each MOSFET acts as the output, while the gate of each MOSFET is pulled to a positive voltage to the logic-low level, and has an inverse relationship with their respective gates. That is, when a low voltage is applied to one of the gates, the other is forced to the high voltage level; and vice versa. The device also has two power leads, a positive voltage lead (VCC) and a ground lead (GND).

The two inputs of SN74HCT02PW, designated A and B, can be either logic-high or logic-low. If both inputs A and B are logic-low, both outputs Y and Z will be logic-high, making it an open-collector logic gate since both outputs are sinking no current. When either input A or B is logic-high, one of the outputs, specifically output Z, will be logic-low (or low-level output) while Y will be logic-high (high-level output). Therefore, the SN74HCT02PW can be used to produce an inverted output from a single inverted input. This type of operation is often referred as “NOT of an input”.

In addition to power and inputs, the SN74HCT02PW has two resistors connected between its input and output terminals, providing extra noise immunity. These two resistors are normally selected depending on the application’s noise environment and the allowable voltage drop of the logic gate, which can be tuned on-the-fly via the potentiometer. The resistance value of each of the two resistors is usually specified as a fraction of the logic gate’s VCC power supply.

The SN74HCT02PW dual-inverting gate can be found in various applications such as memory access controls, low-power circuits, digital multiplexers and other logic devices. It can also be used for both discrete and analog signal applications. For example, when used in the latter capacity, the logic gate can be used to invert analog signals, thus allowing them to be compared against digital reference levels.

In short, the SN74HCT02PW attributes great flexibility to system designers, who can use the device in diverse applications and tasks in the digital, mixed signal and memory circuit designs, and in low power or high speed operations. Its dual-inversion capability makes it highly suitable for noise-protection operations, and the two resistors provide extra protection against noise interference while still allowing precise tuning options.

The specific data is subject to PDF, and the above content is for reference