SN74LS112AD

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SN74LS112AD is a quad J/K flip-flop featuring individual J, K, clock, set and reset inputs and complementary outputs. The LS112AD uses TTL logic and is available in a 14-pin plastic dip or a 16-pin plastic surface mount packages. It is part of the 74 LS00 series which is a line of low-power Schottky integrated circuits manufactured by Texas Instruments.

This type of flip-flop has a wide range of applications. It can be used in digital systems where latching or temporary storage of data is required. Examples of such systems are counters, shift registers and computer memory. It can also be used as a single bit memory device in the control logic of computers, adding machines and industrial control systems.

The main advantage of this type of flip-flop is its speed and power efficiency. It has a low propagation delay, meaning that the output changes quickly in response to a change in the input. This makes it well suited for applications requiring a fast response. In addition, the LS112AD operates off of a lower voltage (2.7V to 6V), meaning that it requires less power to operate. This makes it useful in portable applications.

The SN74LS112AD has two data inputs, the J and K inputs. When the latch is enabled by asserting the clock, set or reset signals, the outputs will change based on the information stored in the J and K inputs. The table below summarizes the operation of the flip-flop in terms of its input and output states.

When the clock, set or reset inputs become active, the outputs change according to the inputs. If a set or reset is activated, the corresponding output sets to a high or low, respectively. If none of the set/reset inputs are activated, then the outputs will change based on the J and K inputs. If the inputs are both low, then the outputs remain the same, if one is high and the other is low, then the corresponding output will change, and if both inputs are high then the outputs will toggle.

The LS112AD J/K flip-flop is a versatile device with many applications. It is useful in digital systems where latching or temporary storage of data is needed, such as in counters, shift registers and computer memory. The device has a low propagation delay and a low power consumption, making it suitable for portable applications. It also has two data inputs which can be used to control the outputs.

The specific data is subject to PDF, and the above content is for reference