SN74LS76AD

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Flip flops are a type of logical device that are designed to maintain a state or transfer information between two points. The SN74LS76AD is one such logical device, designed as a bistable flip-flop. A bistable flip-flop can be classified as either edge-controlled (synchronous) or level-controlled (asynchronous). The SN74LS76AD is an edge-controlled (synchronous) flip-flop and is used primarily in applications such as address and data bus multiplexing, frequency dividers, shift registers, and Register File Shift Registers.

A bistable flip-flop consists of two states, which are known as ‘high’ and ‘low’. A bistable flip-flop is defined as the type of flip-flop with two stable states and which remains in that state until the next clock edge. The clock edge is used to determine when a state transition will take place. A bistable flip-flop can also be defined as a device which operates with a single input signal and uses the same signal to change its state.

The SN74LS76AD is a dual 4-bit bistable flip-flop with a typical propagation delay of 15ns and a maximum clock frequency of 250kHz. It is available in a standard 14-pin dual in-line package (DIP) and is typically used in systems such as microprocessors and logic controllers. The device has two separate data inputs, a clock signal input, two set/reset inputs, two strobe inputs, and two outputs. The data inputs are used to accept two 4-bit words, one for each of the four data bits. The clock signal is used to determine when the flip-flop is to change state, and the set/reset inputs are used to set or reset the flip-flop\'s output. The strobe inputs are used to enable the flip-flop\'s output.

In terms of operation, the SN74LS76AD operates in the same way as a regular bistable flip-flop, but with the addition of two special features. The first is an optional ‘Inhibit’ feature, which allows the flip-flop to be held in a stable state without the need for a clock signal. This feature is typically used in applications where the data is only required at certain moments. The second is an optional ‘Enable’ feature, which allows the flip-flop to be held in a low state, even when a clock signal is present. This feature is useful when there is a need to transition quickly between high and low states.

The SN74LS76AD is a versatile flip-flop that can be used in a variety of applications. It is well-suited for applications such as address and data bus multiplexing, frequency dividers, shift registers, and Register File Shift Registers. The device is also suitable for use in microprocessors and logic controllers, and it can be used as a stand-alone flip-flop or as part of an input or output logic system. The device is available in multiple configurations, making it easy to customize for specific applications. This makes the SN74LS76AD an ideal choice for a variety of tasks.

The specific data is subject to PDF, and the above content is for reference