SN74LVC1G07DSFR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SN74LVC1G07DSFR is a single buffer gates from Texas Instruments’ Logic – Buffers, Drivers, Receivers, Transceivers line of products. This device is intended for use as a signal buffer for low-powered applications, such as circuit driving and switching, interfacing between high and low voltage devices, and bridging between different voltage environments.

The SN74LVC1G07DSFR buffer gate consists of six inverters packaged together, each with an independent enable control. This device has two enable inputs and two outputs. When one of the enable inputs is active (“high”), all six of the inverters are activated and the output is driven to the opposite state of the enable input. When both enable inputs are low, the output will remain in the same state it was before the inputs were changed.

The SN74LVC1G07DSFR is designed to provide both deterministic output and logic level conversion. This enables the device to be used in a number of ways, including driving AC loads up to 24V, driving both open drain and push-pull outputs, and providing logic level conversion from low voltage input to high voltage output. The device is also designed for minimal power consumption when inactive, making it ideal for battery-powered applications.

The SN74LVC1G07DSFR has flexible input and output voltage ratings. It can be used in systems with voltages from 1.65V to 5.5V. This device also has a maximum switching frequency of 25MHz, allowing it to handle high speed data signals. Additionally, it features a propagation delay of 3ns for DC operations, making it suitable for time-sensitive applications.

The SN74LVC1G07DSFR buffer gate is well-suited for a number of applications where there is a need to interface two different voltages or drive both AC and DC loads. It is also a good choice for applications that require both level conversion and signal buffering, such as motor control and logic interface systems. The device is also suitable for data line applications, allowing for data signals to be buffered and isolated from any noise present in the system.

The SN74LVC1G07DSFR buffer gate is a versatile device that can be used in a wide range of applications. It offers a good balance between speed and power consumption, making it suitable for high speed, battery-powered applications. Additionally, the device’s flexibility in terms of input and output voltage ratings makes it suitable for many different types of systems. Overall, this device is a great choice for designers looking for a reliable signal buffer.

The specific data is subject to PDF, and the above content is for reference