SN74LVC1G125YZAR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SN74LVC1G125YZAR is a single-channel single-supply buffer/driver/receiver chip which is widely used in consumer electronics and vehicles. The chip is specifically designed for low-power, low-voltage, high-speed operation, making it ideal for use in applications or systems involving high-bandwidth data transmission. Its low power consumption also makes it viable for applications in which power consumption must be kept to a minimum.

A buffer is an electronically controlled switch which controls the flow of electrical signals in circuits. The SN74LVC1G125YZAR is a single-channel buffering device with an output enable (OE) and a non-inverting enable (EN). The OE pin is used for controlling the output of the buffer, while the EN pin is used for enabling or disabling the device. When the EN pin is set to a high-level, data is propagated from the input to the output and the chip is enabled. When the EN pin is set to a low-level, data is not propagated from the input to the output and the chip is disabled.

The SN74LVC1G125YZAR is designed to operate in applications requiring low voltage and high speed capabilities. It is capable of operating at supply voltages as low as 0.8V, making it ideal for low-voltage applications. It is also designed to operate at speeds exceeding 50MHz, making it suitable for applications requiring high-speed data transmission. The chip can also be operated in either SSTL or MSTL logic families.

The SN74LVC1G125YZAR can be used as a buffer, driver, receiver, or transceiver, depending on the application. As a buffer, it can be used to control the flow of signals in signal paths. As a driver, it can be used to buffer and switch signal paths or to drive signal loads. As a receiver, it can be used to receive signals from other devices and convert them into a logic level output. As a transceiver, it can be used to transmit and receive signals between two devices.

The SN74LVC1G125YZAR is a versatile, low-voltage buffer/driver/receiver chip which is designed to meet the needs of most high-speed, low-power applications. It is suitable for use in a variety of applications, including consumer electronics and vehicles, and its wide operating voltage range makes it ideal for use in low-voltage applications. Its high-speed operation makes it suitable for data transmission applications, while its low power consumption makes it viable for applications where power consumption must be minimized.

The specific data is subject to PDF, and the above content is for reference