SN74LVC1G175YZPR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SN74LVC1G175YZPR device is a type of single-bit register, and falls into the category of logic flip flops. This type of device is used in many technological applications in order to store data and control logic of a system. The SN74LVC1G175YZPR specifically is a low-voltage logic device that is designed to operate with a supply voltage of 1.1V to 3.6V and supports 8 mA fan-out for both high and low power applications. This is advantageous as it allows an engineer to use the device in scenarios with limited power supplies, or in scenarios that require a lower power consumption.

The SN74LVC1G175YZPR contains two basic parameters: input voltage, and output voltage. This device has two inputs: the SET input and the RESET input. These inputs must be either 0V or 3.6V (for low-power applications) to be considered valid. The SET and RESET inputs are used to control whether the SN74LVC1G175YZPR registers a logic 0 or a logic 1. When both inputs are at 3.6V, then the SN74LVC1G175YZPR will output a logic 1. If one of the inputs is at 0V then the SN74LVC1G175YZPR will output a logic 0.

Another important component of the SN74LVC1G175YZPR is the output circuit. The output for the SN74LVC1G175YZPR is a standard CMOS totem pole output, meaning that the output can be driven in both directions. This allows the device to source current from VCC (the power supply voltage) and sink current to ground, which creates a push-pull effect for the output signal. In addition, the output circuit also contains Schmitt triggers on both the SET and RESET inputs in order to ensure the output works correctly in a variety of applications.

The SN74LVC1G175YZPR is an important component in many different types of circuits and applications. It is often used to synchronize circuit elements, store data, hold output states, control and enable other circuits, act as a multiplexer, and in general, regulate the flow of data within a given circuit. The device is also used in data transmission and communication systems, in timing and logic circuits and in “smart” embedded electrical and mechanical systems, as logic flip flops are often the backbone of such systems.

In conclusion, the SN74LVC1G175YZPR is a key device in many technological applications, and its wide range of features and functions make it a versatile and reliable option for many engineers. Receiving its classification as a logic flip flop, this device serves as an effective means of storing data, synchronizing, and controlling systems with relative ease.

The specific data is subject to PDF, and the above content is for reference