SN74LVC1G34DBVTG4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SN74LVC1G34DBVTG4 is a dual-input gate that combines logic functions of buffers, drivers, receivers, and transceivers. It has a 1.65-volt to 5.5-volt VCC operating range and is ideal for 1.65-volt to 3.6-volt TTL or CMOS application. This device operates at a wide range of temperatures, including low power consumption. The IC is designed with advanced CMOS technology to minimize power consumption.

The SN74LVC1G34DBVTG4 has two independent gates each with an inverting and non-inverting logic input. Both gates have high noise immunities across the full 1.65V to 5.5V VCC range and operate at low power consumption. This IC also has an open-drain output and can be used in totem pole configurations to perform the same logic functions as two single-input gates.

The versatile SN74LVC1G34DBVTG4 can be applied in a variety of applications such as tri-state or open drain busses, S-R latches, and as logic XOR, XNOR, and NAND functions. The IC is used to provide logic level isolation between two digital systems, allowing both systems to communicate without interfering with each other.

Due to its low power consumption, it is suitable for battery-powered applications like mobile phones, wearable devices, and IoT (Internet of Things) applications. Additionally, its advanced CMOS technology reduces total power consumption and chip size, making it ideal for portable and low-power electronic devices such as cameras and laptops.

At the heart of the SN74LVC1G34DBVTG4 is the pair of transistors used as the buffer driver. The first transistor (Q1) operates as an input buffer while the second (Q2) is an output driver. In the buffer stage, the input is connected directly to the gate of Q1 and acts as the logic input to the device. The buffer converts the voltage levels at the input into a logic high or low at the output. In the output driver stage, Q2 is used to drive the output load. It is connected to a pull-up resistor and its output is connected to an open drain/collector. When Q2 is ON, the output is low and when Q2 is OFF, the output is pulled high by the resistor.

In summary, the SN74LVC1G34DBVTG4 is a dual-input gate with buffering and driver capabilities. Its low power consumption, small size, and wide operating temperature makes it ideal for a variety of applications in mobile, wearable, and IoT devices. It can be used for logic isolation, tri-state/open-drain bus buffering, logic XOR/XNOR/NAND functions, and S-R latching.

The specific data is subject to PDF, and the above content is for reference