SN74LVC1G79DCKTG4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Logic - Flip Flops form an integral part of electronic systems and form the basis of many digital electronic circuits. In this technology they are extremely versatile, as they can be used as memory elements, as shift registers, as counters and in a variety of other applications. The SN74LVC1G79DCKTG4 device is one of the latest additions to the family of logic - flip flops.

The SN74LVC1G79DCKTG4 is a dual 4-state buffer/driver device. It is a member of the low voltage CMOS (LVCMOS) family of devices and is designed for use with supply voltages ranging from 1.65V to 3.6V. The device has two independent non-inverting buffers/drivers and each buffer can be independently enabled. The device also has a latch enable signal (LE) which will hold the state of the outputs until the LE signal is asserted low. This makes the device ideal for use where two independent 4-state devices are required in a single chip.

The SN74LVC1G79DCKTG4 is designed for high-speed logic applications. It is capable of driving signals up to 95 mA (maximum). The device can operate up to 150MHz. It is pin and function compatible with the SN74VCH1G07DCKTG4, making it easy to upgrade existing design without significant changes.

The SN74LVC1G79DCKTG4 has a wide range of applications. It is ideal for memory applications, as a shift register, as a counter, as a logic cell, and as a multiplexer. In addition, it can be used as a voltage level translator and as a wake-up logic cell. It is also used as a data bus transceiver, as a serial link, as a FIFO device, and as a toggle memory cell.

The working principle of the SN74LVC1G79DCKTG4 is fairly simple. When the device is powered on, it has two selector pins (S1 and S2) and two data pins (D1 and D2). When the selector pins are set to a logic high voltage the device will then output the data from the corresponding pin (in the case of S1 and D1 or S2 and D2). When the selector pins are set to a logic low voltage, the device will latch and keep outputting the data. This makes it easy to store data and use it later when needed.

The SN74LVC1G79DCKTG4 can also be used in a variety of ways in order to increase its versatility. It can be used as a 4-state device, as a 4-state shift register, as a 4-state toggle memory, as a 4-state counter, as a serial link, as a voltage translator, as a wake-up logic cell, and as a data bus transceiver. By taking advantage of all of its capabilities, the SN74LVC1G79DCKTG4 can be applied in a variety of applications.

The SN74LVC1G79DCKTG4 is an important member of the flip flop family and has a wide range of applications in modern electronics. The ability to operate from a wide range of supply voltages, high-speed operation, and the fact that it is pin and function compatible with the SN74VCH1G07DCKTG4 make it an ideal choice for applications that require a 4-state device.

The specific data is subject to PDF, and the above content is for reference