SN74LVC1GX04DBVR Integrated Circuits (ICs)

Logic Type:	Crystal Oscillator Driver
Supply Voltage:	1.65 V ~ 5.5 V
Number of Bits:	1
Operating Temperature:	-40°C ~ 125°C (TA)
Mounting Type:	Surface Mount
Package / Case:	SOT-23-6
Supplier Device Package:	SOT-23-6
Base Part Number:	74LVC1GX04
Series:	74LVC
Packaging:	Tape & Reel (TR)
Part Status:	Active

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

The SN74LVC1GX04DBVR is a high speed, single gate, low voltage CMOS logic buffer designed for use in applications where space efficiency and low-power dissipation are of prime importance. It is built on Siliconix\'s advanced FET technology, providing high performance, robustness and low power dissipation. The SN74LVC1GX04DBVR can be used in a variety of digital designs, such as digital to analog converter (DAC) modules, analog multiplexers, multiplexers, and shift registers.

Application Field

SN74LVC1GX04DBVR is ideally suited for use as a high-speed logicbuffer to improve the performance of microprocessors, microcontrollers and other digital integrated circuits. It drives the data output lines of these devices with minimal input delay and maximum data throughput. This buffer can also be used to isolate a logic device from an asynchronous or high clock frequency data source. This buffer operates at 3.3 V and can handle input voltage up to 5 V, making it ideal for use in portable or low-power applications.In addition, SN74LVC1GX04DBVR is suitable for applications requiring protection from high static voltages and large currents, such as power supply circuits, data converters and low-voltage logic interfaces. Its high speed and low power operation make it well suited for high-speed systems.

Working Principle

The SN74LVC1GX04DBVR is a low-voltage single-gate CMOS device designed for high-speed digital Logic buffers. It is constructed by connecting a high-speed CMOS transistor pair in series. The input signal is applied to the common emitter, and the resulting differential output is taken at the collectors. The output voltage swing is limited to VDD - VSS, and the signals are buffered at high speed by the logic buffer circuit.The SN74LVC1GX04DBVR utilizes a small area cell to minimise power dissipation, reduce noise and conserve board space. The logic level thresholds of the input and output pins are very low - the low voltage LOW-state input voltage is typically 0.2V and the high voltage HIGH-state output voltage is typically 4.9V. The gate is buffered to reduce loading on the driving circuit and to minimise parasitic effects. The SN74LVC1GX04DBVR also has a non-inverting open-drain output that is low-current sourcing, allowing it to be connected to multiple devices to reduce the effects of capacitive loading on the output. The outputs are typically capable of driving up to 25mA loads at 3.3V.

Conclusion

The SN74LVC1GX04DBVR is a high-speed, low-power single-gate CMOS logic buffer designed for space efficiency and low-power dissipation. It is ideally suited for applications requiring high speed logic buffering, isolation of logic devices or protection from large currents, and a wide range of voltages. The buffered input reduces loading on the driving circuit and minimises parasitics, while the open-drain output reduces capacitive loading on the output and enables multiple devices to be connected.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description