SN74LVC2G07DBVRE4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SN74LVC2G07DBVRE4 is a dual-inverter buffer/driver and one of the many products available from Texas Instruments. It belongs to the Logic - Buffers, Drivers, Receivers, Transceivers classification. The SN74LVC2G07DBVRE4 is a low-voltage, dual-channel buffer/driver, operating with low-voltage single supply of 1.65V to 5.5V on both the inputs and outputs.

The SN74LVC2G07DBVRE4 offers an industry-leading combination of low-voltage operation, high level of integration, and wide common-mode voltage range, making it ideal for use in battery-powered, low-voltage, and portable applications. It operates with high speed (3.3ns propagation delay) while consuming very low power and offering high noise immunity.

The device consists of two independently operated buffers/drivers (A and B) with separate input, output, enable and ground pins. Each of the buffers is capable of driving or sinking 16mA of output current with a typical propagation delay of 3.3ns. The enable pin allows input signals to be pulled low or dynamically enabled into the buffer. In this way, the device can be powered down to reduce power consumption.

The SN74LVC2G07DBVRE4 has very high noise immunity due to its very low propagation delay (3.3ns) and extremely low output levels (0.4V). This enables the device to accept input signals that have high noise levels due to ground bounce or crosstalk in noisy environments. The device also features an open drain output for wired-or applications.

The SN74LVC2G07DBVRE4 is designed with a very robust design structure to ensure that the device meets all its specification requirements to the letter. It has been proven to operate reliably in a wide temperature range of -40°C to +85°C.

The SN74LVC2G07DBVRE4 is used in a wide range of applications, such as data bus buffers/drivers, address bus buffers/drivers, low-power logic gates in point-of-sale (POS) terminals, automotive controllers, and mixed-signal transceivers.

At a basic level, the SN74LVC2G07DBVRE4 functions by accepting input signals from the pins connected to its inputs. These inputs are buffered and then inverted before being output onto the pins connected to its outputs. The enable pin can be used to disable the input signal from being passed through to the outputs, thus allowing the device to be powered down to reduce power consumption. The SN74LVC2G07DBVRE4 is designed to operate to its full specification for a wide range of temperatures, ensuring reliable operation in adverse conditions.

The specific data is subject to PDF, and the above content is for reference