SN74LVC2G74DCUTG4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Flip flops are an important class of logic circuit. A flip-flop is a device that holds a single bit of information and is used in digital designs. SN74LVC2G74DCUTG4 is one of the most popular flip-flop device. This device has wide applications in different fields and its working principle is fairly easy to understand.

SN74LVC2G74DCUTG4 is a double symmetrical D-type flip-flop. It has two cross-coupled NAND gates; one with a set input (S) and one with a reset input (R). It has a non-inverting output (Q) and an inverting output (Q\'). It has two input pins (D and Set/Reset) and two output pins (Q and Q\') with the following functionalities:

• D : The ‘D’ input pin is used as the data input pin. When a logic ‘1’ or ‘0’ is applied to the ‘D’ input, the ‘Q’ and ‘Q’ outputs will both change to the same level as the ‘D’ input.
• Set/Reset : The Set/Reset, or SR, pin is used to control the output state. When a logic ‘1’ is applied to the Set pin and a logic ‘0’ is applied to the Reset pin, the ‘Q’ and ‘Q’ outputs will both be forced to a logic ‘1’. When a logic ‘0’ is applied to the Set pin and a logic ‘1’ is applied to the Reset pin, the ‘Q’ and ‘Q’ outputs will be forced to a logic ‘0’.

The SN74LVC2G74DCUTG4 flip-flop is most commonly used in memory applications, such as counters and register, where it is frequently used to store and pass information from one clock cycle to the next. It can also be used as a level-conversion circuit, providing a way to adapt information from one logic family to another. Moreover, it can be used as a bus isolation circuit, where it keeps data in isolation until it is ready to be transmitted.

The working principle of the flip-flop is based on the positive feedback of the cross-coupled NAND gates. This positive feedback is created when the output of one gate is connected to the input of the other gate, completing the logic ‘loop’. When a logic ‘1’ is applied to the ‘Set’ pin and a logic ‘0’ is applied to the ‘Reset’ pin, the Q and Q’ outputs will both be forced to a logic ‘1’ due to the positive feedback between the two NAND gates. This same feedback also works for a logic ‘0’ being applied to the ‘D’ pin, forcing the Q and Q’ outputs to a logic ‘0’.

The SN74LVC2G74DCUTG4 flip-flop is a popular device used in a wide range of applications, from memory and logic circuits to level-conversion and bus isolation. Its robust design and easy-to-understand working principle make it the ideal choice when designing logic circuitry.

The specific data is subject to PDF, and the above content is for reference