SN74LVC374ADWRE4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SN74LVC374ADWRE4 is a type of logic device, more specifically, a Flip-Flop. A Flip-Flop is a type of latch circuit that consists of a pair of cross-coupled transistors or logic gates. The output of a Flip-Flop is held until the input changes, effectively allowing it to "remember" the state it was in last. This form of digital memory makes them very useful in a variety of applications.

The SN74LVC374ADWRE4 is a dual-edge triggered D-type latch, meaning that the output will change its state on both the rising and falling edges of the clock signal. It is also a dual-phase non-inverting latch, which means that the output will be the negation of the data input on both clock phases. It also has an enable pin that provides additional control over the operation of the Flip-Flop, allowing it to be disabled when it is not needed.

The SN74LVC374ADWRE4 is commonly used in logic signal processing applications like programmable logic controllers and embedded controllers. It is also commonly used to control data flow or logic signals in digital equipment like computers or digital signal processors. The device can also be used to create shift-registers, allowing it to store multiple bits of information. It can also be used to build many of the basic logic gates, such as AND, OR, and NOT gates.

The SN74LVC374ADWRE4 is a versatile and reliable device, making it ideal for a variety of digital signal processing applications. Its simple design and fast response time make it well suited for high speed applications. It is also relatively low cost compared to other digital logic devices, making it attractive for many types of applications.

The basic working principle of the SN74LVC374ADWRE4 is relatively simple. The device consists of two cross-coupled transistors, one of which is typically a P-Channel MOSFET and the other an N-Channel MOSFET. When the clock signal is in the high state, current flows through the device, setting the output to the inverse of the data signal. When the clock signal is in a low state, the device is in a non-conductive state, meaning that the output will be held in its previous state.

The specific data is subject to PDF, and the above content is for reference